安规网 » 信息音视频产品及电源认证 » UL跟踪检验服务程序是什么样子的呢?哪位好心人给我份看看白
本页主题: UL跟踪检验服务程序是什么样子的呢?哪位好心人给我份看看白 打印 | 加为IE收藏 | 收藏主题 | 上一主题 | 下一主题

jia_suwei




级别: 安规学徒
精华: 0
发帖: 185
安规威望: 8 点
安规金币: 3 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:318(小时)
注册时间:2011-05-09
最后登录:2012-01-06

UL跟踪检验服务程序是什么样子的呢?哪位好心人给我份看看白

如题~~~

本文由jia_suwei在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 15:44 | [楼 主]    新版 | 旧版安规网
Andy.Yang

头衔:天人水 天人水

级别: 安规工程师
精华: 0
发帖: 1466
安规威望: 21 点
安规金币: 8280 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:952(小时)
注册时间:2009-01-16
最后登录:2012-01-21

That's UL follow up service procedure, normally we called UL file, and should include:
1. Authorization Page, we also can call it UL certificate;
2. Index page, which shows how many series or Part No. are covered by your UL file, and covered by which section;
3. Listing mark data page for UL listed products, or Recognized mark data page for UL recognized products, maybe others, such as classified mark description page;
4. Section general, which describes some general requirements of your products covered by your UL FUS procedure;
5. Detailed section, for example Sec. 1, sec, 2 and etc, which can show detailed  components' description of your products, and those will be controlled by UL, we call it the conformity, such as the size, suppliers' information, we also called it the critical component list.

本文由Andy.Yang在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 16:16 | 1 楼    新版 | 安规网
jia_suwei




级别: 安规学徒
精华: 0
发帖: 185
安规威望: 8 点
安规金币: 3 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:318(小时)
注册时间:2011-05-09
最后登录:2012-01-06

I konw that,while I want to konw some details about the FUS procedures.But I have none in my hand.So I need help here.
Unfortunately no one helps me.

本文由jia_suwei在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 16:33 | 2 楼    新版 | 安规网
Andy.Yang

头衔:天人水 天人水

级别: 安规工程师
精华: 0
发帖: 1466
安规威望: 21 点
安规金币: 8280 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:952(小时)
注册时间:2009-01-16
最后登录:2012-01-21

Pls, that's secret information of one company, it's not so good to show the detailed information of the FUS procedure here, hopefully, you can understand.
By the way, don't you have one set of FUS procedure of your own company?

本文由Andy.Yang在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 16:46 | 3 楼    新版 | 安规网
xadzkjdxhj


级别: 安规技术员
精华: 0
发帖: 765
安规威望: 21 点
安规金币: 1002 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:525(小时)
注册时间:2010-06-24
最后登录:2012-02-12

Do you have UL Myhome account? If you have one, you can login UL Myhome web site to find the UL FUS of your product.If you don't have an account,then you'd better apply one(if you don't know how to apply,you can contact with the nearby UL Center ),with it,you will be more convenient.

本文由xadzkjdxhj在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 16:59 | 4 楼    新版 | 安规网
defong


级别: 安规技术员
精华: 0
发帖: 910
安规威望: 51 点
安规金币: 544 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:1621(小时)
注册时间:2010-02-01
最后登录:2011-12-02

who can tell me how to get the test standard for the products in UL my home website.

本文由defong在供参考的旧版安规网发表,建议进入新版交流!
安规菜鸟王
顶端 Posted: 2011-07-26 17:25 | 5 楼    新版 | 安规网
zy3618

头衔:紫气东来 紫气东来

级别: 安规专家
精华: 0
发帖: 5518
安规威望: 125 点
安规金币: 22209 个
安规宣传: 8 次
安规测试报告: 0 份
在线时间:1323(小时)
注册时间:2008-07-04
最后登录:2011-12-18

产品认证后,
UL派人员根据要求,对工厂进行不确期审厂。

本文由zy3618在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 19:35 | 6 楼    新版 | 安规网
jia_suwei




级别: 安规学徒
精华: 0
发帖: 185
安规威望: 8 点
安规金币: 3 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:318(小时)
注册时间:2011-05-09
最后登录:2012-01-06

Quote:
引用第3楼Andy.Yang于2011-07-26 16:46发表的  :
Pls, that's secret information of one company, it's not so good to show the detailed information of the FUS procedure here, hopefully, you can understand.
By the way, don't you have one set of FUS procedure of your own company?



I have no one,if I have,I need not call for help here.The documents are all kept in Japan.

本文由jia_suwei在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 20:28 | 7 楼    新版 | 安规网
jia_suwei




级别: 安规学徒
精华: 0
发帖: 185
安规威望: 8 点
安规金币: 3 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:318(小时)
注册时间:2011-05-09
最后登录:2012-01-06

Quote:
引用第5楼defong于2011-07-26 17:25发表的  :
who can tell me how to get the test standard for the products in UL my home website.



Maybe you can ask the UL's representative.He must know.

本文由jia_suwei在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 20:30 | 8 楼    新版 | 安规网
xadzkjdxhj


级别: 安规技术员
精华: 0
发帖: 765
安规威望: 21 点
安规金币: 1002 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:525(小时)
注册时间:2010-06-24
最后登录:2012-02-12

Quote:
引用第7楼jia_suwei于2011-07-26 20:28发表的  :



I have no one,if I have,I need not call for help here.The documents are all kept in Japan.


I think you are in a factory,and your products are applied UL certifcate by the parent company.

in this case, you can ask your parent company to send one to you.you can even require your customer giving the UL file to you.because it is necessary for the factory inspection.

i have the same  situation with you.but i get the Myhome account from my parent company,and i can download my ul files from the website.

本文由xadzkjdxhj在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 20:47 | 9 楼    新版 | 安规网
Andy.Yang

头衔:天人水 天人水

级别: 安规工程师
精华: 0
发帖: 1466
安规威望: 21 点
安规金币: 8280 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:952(小时)
注册时间:2009-01-16
最后登录:2012-01-21

Quote:
引用第7楼jia_suwei于2011-07-26 20:28发表的  :



I have no one,if I have,I need not call for help here.The documents are all kept in Japan.

Even in this case, I mean you are one of the manufacturing location shown in the authorization page, you also can apply for an UL MyHome account, and let the gatekeeper(should locate in Japan, and is responsible for UL approval) release the authorization to you, that'll be helpful for you to know more about the FUS procedure, as well, it's better for you to communicate with UL field representative( factory auditor) when factory audit happens.

Furthermore, if your Japan company would not like to share this account to you, or release the authorization to you, I believe it should share the hard copy of your FUS procedure to you at least.

本文由Andy.Yang在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-07-26 20:55 | 10 楼    新版 | 安规网
包子




级别: 安规技术员
精华: 0
发帖: 602
安规威望: 239 点
安规金币: 414 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:610(小时)
注册时间:2007-12-05
最后登录:2011-12-14

Generally, UL always consider how factory/manufacturer could satisfy the compliance for the UL model product and UL report, to ensure the compliance, UL invented a procedure called FUS procedure which is carried out by CCIC.
Once you follow the procedure 1 or 2 times, you will get it.
Congratulations to our safety team.
Do you have myhome accout? maybe we could share some information together.
UL recently provided a hard copy to all of factory reprentative to know about FUS.I think you may have received it.

本文由包子在供参考的旧版安规网发表,建议进入新版交流!
回首向来萧瑟处,也无风雨也无情
顶端 Posted: 2011-08-01 20:41 | 11 楼    新版 | 安规网
tenda9422


级别: 安规新人
精华: 0
发帖: 15
安规威望: 2 点
安规金币: 2 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:5(小时)
注册时间:2011-08-07
最后登录:2011-09-18

分为IPI和季度抽查,

IPI即证产品首次工厂检验,一般不出现重大差异都可以获得通过的IPI报告。

获证后,每季度UL外包的CCIC检验员会抽查一次,当日有生产的话,会抽样做CDF对照,没生产就算通过了

具体的标准文献可以在贵司的UL@MY HOME下载相关资料,也可联系分管贵司的CCIC检验员给您提供一个UL小红本,具体都有详细介绍。

本文由tenda9422在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-08-07 14:18 | 12 楼    新版 | 安规网
lida1218




级别: 安规学徒
精华: 0
发帖: 237
安规威望: 5 点
安规金币: 44 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:220(小时)
注册时间:2011-01-07
最后登录:2012-01-14


本文由lida1218在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-08-08 10:08 | 13 楼    新版 | 安规网
安规网 » 信息音视频产品及电源认证


安规网免责声明
安规网已运行
安规网所有的原创文章,版权归安规网和作者共同拥有,未经许可,任何网站不得非法盗链、转载及抄袭!
网友文章或评论仅代表作者个人观点并由其承担相应法律责任,不代表本站观点!如果侵犯了您的权益,请提供相关证明,我们将尽快删除!
安规网为非经营性技术论坛,所有资源均为网友自主提供,仅供个人学习与研究,版权归原作者,切勿用于商业用途,否则一切后果与安规网无关!

关于我们 | 认证工具 | 免责声明 | 法律条款 | 广告服务
Total 0.026175(s) query 7, Time now is:05-06 23:36, Gzip enabled
Powered by Angui.org Support by PHPWind

安规网版权所有 安规网 安规网论坛 安规认证论坛 Copyright Reserved
粤ICP备07035324号