安规网 » 案例剖析专栏 » 出口产品召回案例介绍(3)——饮水机(结构)
本页主题: 出口产品召回案例介绍(3)——饮水机(结构) 打印 | 加为IE收藏 | 收藏主题 | 上一主题 | 下一主题

caballo3157
资助会员

级别: 安规总版主
精华: 6
发帖: 2314
安规威望: 646 点
安规金币: 7717 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:7413(小时)
注册时间:2007-05-10
最后登录:2011-12-17

出口产品召回案例介绍(3)——饮水机(结构)

通报国Notifying country:塞浦路斯Cyprus 6nfkZvn 安规网www.angui.org发表,外站出现为抄袭 
产品Product:  分类:电器 1h#k&r#*3 安规网www.angui.org发表,外站出现为抄袭 
        名称:饮水机  bSR<d 安规网www.angui.org发表,外站出现为抄袭 
        品牌:Domotec [s34N+vU 安规网www.angui.org发表,外站出现为抄袭 
        型号:D6240 &Kv evPF 安规网www.angui.org发表,外站出现为抄袭 
        描述:白色饮水机,顶部装水桶。它有2个开关,分别控制加热和制冷。功率601W,电压220-240V,50Hz,中华人民共和国制造,CE、RoHS认证。 4GfLS.Ip 安规网www.angui.org发表,外站出现为抄袭 
        原产地:中国 z\h+6FCD 安规网www.angui.org发表,外站出现为抄袭 
Category: Electrical appliances oto od 安规网www.angui.org发表,外站出现为抄袭 
Product: Water dispenser rO`g~>- 安规网www.angui.org发表,外站出现为抄袭 
Brand: Domotec *0hiPj: 安规网www.angui.org发表,外站出现为抄袭 
Type/number of model: D6240 t? A4xk 安规网www.angui.org发表,外站出现为抄袭 
Description: White water dispenser fitted with a water bottle on top. It has two switches to switch on and off the heater or cooler of the device. Power: 601W, Voltage 220-240 volts, 50 Hz, made in P.R.C., Certificates CE, RoHS oe*&w9Y}& 安规网www.angui.org发表,外站出现为抄袭 
Country of origin: China MELGTP> 安规网www.angui.org发表,外站出现为抄袭 
饮水机1.jpg =qtoDe 安规网www.angui.org发表,外站出现为抄袭 
饮水机2.jpg tZYI{ m{ 安规网www.angui.org发表,外站出现为抄袭 
饮水机3.jpg ]6;AK\9TM 安规网www.angui.org发表,外站出现为抄袭 
  危险Danger: z-gwNE{ 安规网www.angui.org发表,外站出现为抄袭 
烫伤和触电伤害 OT& E)eR 安规网www.angui.org发表,外站出现为抄袭 
      产品有触电和烫伤的危险,当工作在过压时,塑料管连接处有蒸汽和水泄漏。 +7Lco"\w< 安规网www.angui.org发表,外站出现为抄袭 
      产品不符合低压电器指令(LVD)和相关欧洲标准EN60335。 /C:'qhY, 安规网www.angui.org发表,外站出现为抄袭 
Electric shock, burns and injuries L@4zuzmlb 安规网www.angui.org发表,外站出现为抄袭 
4QN;o%, 安规网www.angui.org发表,外站出现为抄袭 
The product poses a risk of electric shock, burns and injuries because, when operated, excessive pressure was observed and the plastic tube joints were leaking steam and water. The product does not comply with the relevant European standard EN 60335 D+)=bPMe 安规网www.angui.org发表,外站出现为抄袭 
._&lG3' 安规网www.angui.org发表,外站出现为抄袭 
通报国采取措施: ThlJhTh<%4 安规网www.angui.org发表,外站出现为抄袭 
当局下令禁售。 Q kZM(pG 安规网www.angui.org发表,外站出现为抄袭 
Measures adopted by notifying country: ^0|NmMJ] 安规网www.angui.org发表,外站出现为抄袭 
Sales ban ordered by the authorities


[ 此贴被caballo3157在2009-12-16 10:00重新编辑 ]

本文由caballo3157在供参考的旧版安规网发表,建议进入新版交流!
本帖最近评分记录:
  • 安规威望:+1(fasten) 优秀文章
  • 顶端 Posted: 2009-12-15 16:19 | [楼 主]    新版 | 旧版安规网
    chengming


    级别: 安规技术员
    精华: 0
    发帖: 524
    安规威望: 165 点
    安规金币: 518 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:259(小时)
    注册时间:2009-01-09
    最后登录:2011-12-07

    哪里不合格,召回原因呢?

    本文由chengming在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2009-12-15 16:21 | 1 楼    新版 | 安规网
    caballo3157
    资助会员

    级别: 安规总版主
    精华: 6
    发帖: 2314
    安规威望: 646 点
    安规金币: 7717 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:7413(小时)
    注册时间:2007-05-10
    最后登录:2011-12-17

    案例摘自- Weekly overview report of RAPEX notifications -week 38 – 2009 tjb/[RQ 安规网www.angui.org发表,外站出现为抄袭 
    ~ v1W 安规网www.angui.org发表,外站出现为抄袭 
    您认为这是根据哪一个标准(特殊要求)、标准中哪一条、那一个试验来判定的?试验该如何做?

    本文由caballo3157在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2009-12-15 16:25 | 2 楼    新版 | 安规网
    luqing_sz

    头衔:家电安规 家电安规

    级别: 安规版主
    精华: 0
    发帖: 5171
    安规威望: 239 点
    安规金币: 21245 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:9939(小时)
    注册时间:2008-05-03
    最后登录:2012-02-09

    Clause 22.6 ^-L{/'[8M 安规网www.angui.org发表,外站出现为抄袭 
    Compliance is checked by inspection and, in case of doubt, by the following test.  Drops of coloured water solution are applied by a syringe to parts inside the appliance where leakage of a liquid could occur and affect electrical insulation. The appliance is in operation or at rest, whichever is the more unfavourable.  After this test, inspection shall show that there is no trace of liquid on windings or insulation that could result in a reduction of creepage distances below the values specified in 29.2. 

    本文由luqing_sz在供参考的旧版安规网发表,建议进入新版交流!
    I love three things:the sun,the moon and you.the sun for day,the moon for night and you for evertime!

    顶端 Posted: 2009-12-16 09:26 | 3 楼    新版 | 安规网
    caballo3157
    资助会员

    级别: 安规总版主
    精华: 6
    发帖: 2314
    安规威望: 646 点
    安规金币: 7717 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:7413(小时)
    注册时间:2007-05-10
    最后登录:2011-12-17

    我认为是22.7: z+6QZQk 安规网www.angui.org发表,外站出现为抄袭 
    22.7 Appliances containing liquid or gases in normal use or having steam-producing devices D% @KRcp^b 安规网www.angui.org发表,外站出现为抄袭 
    shall incorporate adequate safeguards against the risk of excessive pressure. j1Fw U 安规网www.angui.org发表,外站出现为抄袭 
    Compliance is checked by inspection and, if necessary, by an appropriate test. 4.k`[q8 安规网www.angui.org发表,外站出现为抄袭 
    nhT;b,G.Z 安规网www.angui.org发表,外站出现为抄袭 
    因为这里提出的“ risk of excessive pressure.”似乎和原判定一致。 {*__B} ,N 安规网www.angui.org发表,外站出现为抄袭 
    CSH`pU 安规网www.angui.org发表,外站出现为抄袭 
    只是这“an appropriate test.”该如何做呢?


    [ 此贴被caballo3157在2009-12-16 10:01重新编辑 ]

    本文由caballo3157在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2009-12-16 09:55 | 4 楼    新版 | 安规网
    luqing_sz

    头衔:家电安规 家电安规

    级别: 安规版主
    精华: 0
    发帖: 5171
    安规威望: 239 点
    安规金币: 21245 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:9939(小时)
    注册时间:2008-05-03
    最后登录:2012-02-09

    回复4楼,应该是22.6.我认为该案例的饮水机根本不会有压力产生,是一般的饮水机,故不用考滤过压危险.我们也有生产象案例的饮水机,GS报告中判NA.

    本文由luqing_sz在供参考的旧版安规网发表,建议进入新版交流!
    远程图片:clip_image002.jpg 远程图片:clip_image002.jpg
    I love three things:the sun,the moon and you.the sun for day,the moon for night and you for evertime!

    顶端 Posted: 2009-12-16 11:58 | 5 楼    新版 | 安规网
    luqing_sz

    头衔:家电安规 家电安规

    级别: 安规版主
    精华: 0
    发帖: 5171
    安规威望: 239 点
    安规金币: 21245 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:9939(小时)
    注册时间:2008-05-03
    最后登录:2012-02-09

    根据背面,这个电器是压缩机型饮水机,铭牌真的有点问题,没有标制冷电流,及加热功率,没有冷媒种类及冷媒克数;气候类型ST/T也没标,.不符合60335-2-24, Clause 7.1


    [ 此贴被luqing_sz在2009-12-16 12:53重新编辑 ]

    本文由luqing_sz在供参考的旧版安规网发表,建议进入新版交流!
    I love three things:the sun,the moon and you.the sun for day,the moon for night and you for evertime!

    顶端 Posted: 2009-12-16 12:47 | 6 楼    新版 | 安规网
    dahu




    级别: 安规新人
    精华: 0
    发帖: 7
    安规威望: 4 点
    安规金币: 110 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:8(小时)
    注册时间:2010-03-08
    最后登录:2011-08-03

    案例分析太简单了吧!

    本文由dahu在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-03-08 15:39 | 7 楼    新版 | 安规网
    guanito




    级别: 安规工程师
    精华: 0
    发帖: 1744
    安规威望: 156 点
    安规金币: 12099 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:2086(小时)
    注册时间:2007-06-03
    最后登录:2012-02-03

    触电,可能金属外壳接地不良或接地没有全部接到,或未装防松垫圈;烫伤可能开关按下的力没有达到标准规定要求,小孩用很小的力孔就能将热水笼头按下,造成烫伤,非正常漏水,可能硅胶没封好或硅胶管太差造成的。

    本文由guanito在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-03-14 10:39 | 8 楼    新版 | 安规网
    sunsd2000




    级别: 安规新人
    精华: 0
    发帖: 14
    安规威望: 6 点
    安规金币: 150 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:2(小时)
    注册时间:2009-11-24
    最后登录:2010-12-15

    这个召回理由太简单了吧。。

    本文由sunsd2000在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-04-12 18:40 | 9 楼    新版 | 安规网
    cshuaiqiu




    级别: 安规新人
    精华: 0
    发帖: 24
    安规威望: 4 点
    安规金币: 55 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:21(小时)
    注册时间:2010-05-06
    最后登录:2011-12-30

    劣质产品

    本文由cshuaiqiu在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2011-08-08 10:29 | 10 楼    新版 | 安规网
    YangT




    级别: 安规新人
    精华: 0
    发帖: 61
    安规威望: 5 点
    安规金币: 3 个
    安规宣传: 0 次
    安规测试报告: 0 份
    在线时间:55(小时)
    注册时间:2011-05-11
    最后登录:2012-01-09

    做个好产品不易容啊

    本文由YangT在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2011-08-12 11:28 | 11 楼    新版 | 安规网
    styu


    级别: 安规学徒
    精华: 0
    发帖: 119
    安规威望: 20 点
    安规金币: 116 个
    安规宣传: 2 次
    安规测试报告: 0 份
    在线时间:79(小时)
    注册时间:2011-05-05
    最后登录:2012-02-03

    请大牛来解析一下,

    本文由styu在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2011-08-12 16:28 | 12 楼    新版 | 安规网
    安规网 » 案例剖析专栏


    安规网免责声明
    安规网已运行
    安规网所有的原创文章,版权归安规网和作者共同拥有,未经许可,任何网站不得非法盗链、转载及抄袭!
    网友文章或评论仅代表作者个人观点并由其承担相应法律责任,不代表本站观点!如果侵犯了您的权益,请提供相关证明,我们将尽快删除!
    安规网为非经营性技术论坛,所有资源均为网友自主提供,仅供个人学习与研究,版权归原作者,切勿用于商业用途,否则一切后果与安规网无关!

    关于我们 | 认证工具 | 免责声明 | 法律条款 | 广告服务
    Total 0.025502(s) query 7, Time now is:04-28 21:40, Gzip enabled
    Powered by Angui.org Support by PHPWind

    安规网版权所有 安规网 安规网论坛 安规认证论坛 Copyright Reserved
    粤ICP备07035324号