请教各位高手：

本人正准备做台式工具的澳洲安全认证，但是听说不能用IEC61029-1及相应的-2标准的CB报告去转，反而被告知说澳洲没有相应的台式工具的标准，所以只有按60335-1的CB报告去转。但是工具按家电的标准去做实在是荒谬！而且即使去做，也会很难通过家电标准的要求啊。请有经验的给点建议。

怎么没人应贴？

Quote:

引用第1楼Jessieqian于2007-07-12 16:35发表的  :
怎么没人应贴？

应该是可以转的。不过还是向YAYA咨询一下吧，她对澳洲的认证比较熟悉。你可以发信息给她呀

标准是ＡＳ３１６０．这个是工具的标准呀．

请注意：澳洲对工具类产品的定义和标准要求为：
Tool – portable type
An electrical appliance which:
•    is for machining, drilling, sawing, or surface preparation; and
•    may be entirely supported by hand during operation
but does not include:
•    a tool, portable type, promoted exclusively to industry.
•    Class specification: a heat pump.
Drill

AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.1:2003.
Sander or polisher (other than disk types)
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.4:2003.
Circular saw
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.5:2003.
Jig or sabre saw
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.11:2003.
Planer
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.14:2003.
Router
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001 (until 14 November 2006) or AS/NZS 60745.1:2003 and AS/NZS 60745.2.17:2003.
Other
AS/NZS 3100:2002 with amendment 1 and AS/NZS 3160:2001.

台式工具并不属于以上范围，只能申请自愿认证，而且因为没有相应的澳洲标准，所以只能由认证部门说了算。

Quote:

引用第4楼Jessieqian于2007-07-16 16:28发表的  :
请注意：澳洲对工具类产品的定义和标准要求为：
Tool – portable type
An electrical appliance which:
•    is for machining, drilling, sawing, or surface preparation; and
•    may be entirely supported by hand during operation
.......

应该是要和客人确认他需要用什么认证，再咨询认证公司是否可以用相应的标准做。如果可以，做；如果不可以，和客人沟通！

客人只要有SAA认证就买我们产品，否则免谈。老板想做生意，但认证公司说的60335-1是绝对不适用，对工具来说肯定是过于严格，无法通过。所以逼我到处打听。苦啊！

台式工具是自愿认证的．如果客户一定要要求，那只能做了．

Quote:

引用第8楼欢乐而歌于2007-07-23 22:38发表的  :

请不要在这里打广告．


[ 此贴被djfu在2007-08-01 10:31重新编辑 ]