这里为安规网旧版程序,不再提供发帖,请转到安规网新版程序:安规论坛bbs.angui.org讨论
安规网 » 澳洲产品认证 » C-tick强制认证标准清单
本页主题: C-tick强制认证标准清单 打印 | 加为IE收藏 | 收藏主题 | 上一主题 | 下一主题

fasten


级别: 安规管理员
精华: 5
发帖: 7239
安规威望: 1727 点
安规金币: 227 个
安规宣传: 1 次
在线时间:8425(小时)
注册时间:2007-05-10
最后登录:2020-05-27

C-tick强制认证标准清单

本帖被 fasten 执行置顶操作(2008-07-22)
The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as a mandatory standard under section 162 of the Radiocommunications Act 1992 as part of the ACMA Electromagnetic Compatibility (EMC) Regulatory Arrangement.
Part 1 Generic standards
1 2 3 4 5 6 7 8 9 10
Serial
Applicable Standard
Full Title of Standard
Source of Std
Publication Date
Vari-ation Y/N Brief description of equipment to which standard should apply
Standard being replaced
Expiry Date of replaced standard
Remarks
G1
AS/NZS 4251.1: 1999
Electromagnetic compatibility (EMC) – Generic emission standard – Part 1: Residential, commercial and light industry
AS/NZS
05/03/1999
N
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
AS/NZS 4251.1: 1994
21/12/2007
G2
AS/NZS 61000.6.3: 2007
Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments
AS/NZS
31/05/2007
N
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
AS/NZS 4251.1: 1999
31/05/2009
G3
EN 61000-6-3: 2001 with amendment A11 (2004)
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
EN
2001
N
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
EN 50081.1: 1992
21/12/2007
G4
IEC 61000-6-3:1996
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
IEC
1996
N
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
G5
IEC 61000-6-3:2006
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
IEC
17/07/2006
N
All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
IEC 61000-6-3:1996
17/07/2008
G6
AS/NZS 4251.2: 1999
Electromagnetic compatibility (EMC) – Generic emission standard – Part 2: Industrial environments
AS/NZS
05/03/1999
N
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
G7
AS/NZS 61000.6.4: 2007
Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission standard for industrial environments
AS/NZS
31/05/2007
N
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
AS/NZS 4251.2: 1999
31/05/2009
G8
EN 61000-6-4:2001
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
EN
2001
N
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
EN 50081-2:1993
21/12/2007
G9
IEC 61000-6-4:1997
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
IEC
1997
N
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
G10
IEC 61000-6-4:2006
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
IEC
10/07/2006
N
All equipment intended for use in an industrial environment that is not covered by one of the product family standards
IEC 61000-6-4:1997
10/07/2008
Part 2 Product family and equipment standards
1
2
3
4
5
6
7
8
9
10
Serial
Applicable Standard
Full Title of Standard
Source of Std
Publication Date
Vari-ation Y/N
Brief
description
of equipment
to which standard
should apply

Standard being
replaced

Expiry Date of replaced standard
Remarks
1
AS/NZS CISPR 11:2004
(2nd Edition)
Industrial
scientific and
medical (ISM) radio-frequency
equipment – Electromagnetic disturbance characteristics –
Limits and methods of measurement
AS/NZS
25/11/2004
N
Industrial
scientific and medical (ISM) radio-
frequency equipment
AS/NZS 2064
21/12/2007
Note: The ISM band for Australian is 918-926 MHz, not 902-928MHz as shown in the standard. Devices operating outside 918-926MHz are not acceptable in Australia .
2
CISPR 11:2003 with amdts 1 (2004) and 2 (2006)
Industrial
scientific and
medical (ISM) radio-frequency
equipment – Electromagnetic disturbance characteristics –
Limits and methods of measurement
CISPR
06/2003
N
Industrial
scientific and medical (ISM) radio-
frequency equipment
CISPR 11:
21/12/2007
Note: The ISM band for Australian is 918-926 MHz, not 902-928MHz as shown in the standard. Devices operating outside 918-926MHz are not acceptable in Australia .
3
EN 55011:1998 with amdts A1 (1999) and A2 (2002)
Industrial
scientific and
medical (ISM)
radio-frequency equipment – Electromagnetic disturbance characteristics
– Limits and
methods of measurement
EN
1998
N
Industrial
scientific and medical (ISM) radio-
frequency equipment
EN 55011:
21/12/2007
Note: The ISM band for Australian is 918-926 MHz, not 902-928MHz as shown in the standard. Devices operating outside 918-926MHz are not acceptable in Australia .
4
AS/NZS CISPR 12:2004
Vehicles, boats
and internal combustion
engine driven
devices – Radio disturbance characteristics
– Limits and
methods of measurement
for the
protection
of receivers
except those
installed in the vehicle/boat/
device itself
or in adjacent vehicles/boats/
devices
AS/NZS
22/04/2004
N
Land based
vehicles
(including
electric
powered
vehicles),
boats and
devices with internal
combustion
engines
AS/NZS 2557
21/12/2007
5
AS/NZS CISPR 12:2006
Vehicles, boats
and internal combustion
engine driven
devices – Radio disturbance characteristics
– Limits and
methods of measurement
for the
protection
of receivers
except those
installed in the vehicle/boat/
device itself
or in adjacent vehicles/boats/
devices
AS/NZS
02/06/2006
N
Land based
vehicles
(including
electric
powered
vehicles),
boats and
devices with internal
combustion
engines
AS/NZS CISPR 12:2004
02/06/2008
6
EN 55012:2002 with amdt A1 (2005)
Vehicles, boats
and internal combustion
engine driven
devices – Radio disturbance characteristics
– Limits and
methods of measurement
for the
protection
of receivers
except those
installed in the vehicle/boat/
device itself
or in adjacent vehicles/boats/
devices
EN
2002
N
Land based
vehicles
(including
electric
powered
vehicles),
boats and
devices with internal
combustion engines
Generic
21/12/2007
7
CISPR 12:2001 with amdt 1 (2005)
Vehicles, boats
and internal combustion
engine driven
devices – Radio disturbance characteristics
– Limits and
methods of measurement
for the
protection
of receivers
except those
installed in the vehicle/boat/
device itself
or in adjacent vehicles/boats/
devices
CISPR
09/2001
N
Land based
vehicles
(including
electric
powered
vehicles),
boats and
devices with internal
combustion engines
 
CISPR 12:1997
21/12/2007
8
CISPR 12:2007
Vehicles, boats
and internal combustion
engine driven
devices – Radio disturbance characteristics
– Limits and
methods of measurement
for the
protection
of receivers
except those
installed in the vehicle/boat/
device itself
or in adjacent vehicles/boats/
devices 
CISPR
23/05/2007
N
Land based
vehicles
(including
electric
powered
vehicles),
boats and
devices with internal
combustion engines
CISPR 12:2001
23/05/2009
9
AS/NZS CISPR 13:2004
Sound and television
broadcast
receivers and associated equipment
– Radio
disturbance characteristics
– Limits and
methods of measurement
AS/NZS
06/06/2004
N
Sound and television
broadcast receivers,
set top boxes,
radio receivers, satellite
receivers,
analog and
digital,
DVD players,
Video recorders, CD players,
audio amplifiers, surround sound equipment
AS/NZS 1053
21/12/2007
10
EN 55013:2001 with amdts A1 (2003) and A2 (2006)
Sound and television
broadcast
receivers and associated equipment
– Radio
disturbance characteristics
– Limits and
methods of measurement
EN
2001
N
Sound and television
broadcast receivers,
set top boxes,
radio receivers, satellite
receivers,
analog and
digital,
DVD players,
Video recorders, CD players,
audio amplifiers, surround sound equipment
EN 55013
21/12/2007
11
CISPR 13:2001 with amdts 1 (2003) and 2 (2006)
Sound and television
broadcast
receivers and associated equipment
– Radio
disturbance characteristics
– Limits and
methods of measurement
CISPR
2001
N
Sound and television
broadcast receivers,
set top boxes,
radio receivers, satellite
receivers,
analog and
digital,
DVD players,
Video recorders, CD players,
audio amplifiers, surround sound equipment
CISPR 13
21/12/2007
12
AS/NZS CISPR 14.1:2003
Electromganetic compatibility – Requirements
for household appliances,
electric tools
and similar apparatus –
Part 1: Emission
AS/NZS
09/10/2003
N
Household appliances,
power tools,
battery
operated tools, electric  and electronic
toys, heating appliances,
kitchen
machines,
motor operated appliances
AS/NZS 1044:
21/12/2007
13
EN 55014-1:2000 with amdts A1 (2001) and A2 (2002)
Electromganetic compatibility – Requirements
for household appliances,
electric tools
and similar apparatus –
Part 1: Emission
EN
2000
N
Household appliances,
power tools,
battery
operated tools, electric  and electronic
toys, heating appliances,
kitchen
machines,
motor operated appliances
EN 55014-1:
21/12/2007
14
CISPR 14-1:2000 with amdts 1 (2001) and 2 (2002)
Electromganetic compatibility – Requirements
for household appliances,
electric tools
and similar apparatus –
Part 1: Emission
CISPR
2000
N
Household appliances,
power tools,
battery
operated tools, electric  and electronic
toys, heating appliances,
kitchen
machines,
motor operated appliances
CISPR 14-1
21/12/2007
15
CISPR 14-1:2005
Electromganetic compatibility – Requirements
for household appliances,
electric tools
and similar apparatus –
Part 1: Emission
CISPR
11/11/2005
N
Household appliances,
power tools,
battery
operated tools, electric  and electronic
toys, heating appliances,
kitchen
machines,
motor operated appliances
CISPR 14-1:2000
11/11/2007
16
AS/NZS CISPR 15:2002
Limits and
methods of measurement
of radio
disturbance characteristics
of electrical
lighting and
similar
equipment
AS/NZS
13/03/2002
Y
Lighting
equipment,
lighting
accessories
such as ballasts, transformers, dimmers
AS/NZS 4051
21/12/2007
17
AS/NZS CISPR 15:2006
Limits and
methods of measurement
of radio
disturbance characteristics
of electrical
lighting and
similar
equipment
AS/NZS
02/06/2006
N
Lighting
equipment,
lighting
accessories
such as
ballasts, transformers, dimmers
AS/NZS CISPR 15:2002
02/06/2008
18
EN 55015:2000 with amdts A1 (2001) and A2 (2002)
Limits and
methods of measurement
of radio
disturbance characteristics
of electrical
lighting and
similar
equipment
EN
2000
N
Lighting
equipment,
lighting
accessories
such as
ballasts, transformers, dimmers
EN 55015
21/12/2007
19
CISPR 15:2005 with amdt 1 (2006)
Limits and
methods of measurement
of radio
disturbance characteristics
of electrical
lighting and
similar
equipment
CISPR
2005
N
Lighting
equipment,
lighting
accessories
such as
ballasts, transformers, dimmers
CISPR 15:2000
21/12/2007
20
AS/NZS CISPR 22:2004
Information technology equipment –
Radio
disturbance characteristics – Limits and
methods of measurement
AS/NZS
06/07/2004
N
Information technology equipment, modems, fax machines,
BPL modems
AS/NZS 3548
21/12/2007
21
AS/NZS CISPR 22:2006
Information technology equipment –
Radio
disturbance characteristics
– Limits and
methods of measurement
AS/NZS
02/06/2006
N
Information technology equipment, modems, fax machines,
BPL modems
AS/NZS CISPR 22:2004
02/06/2008
Testing radiated emissions above 1 GHz is not yet required in Australia.
22
EN 55022:1998 with amdts A1 (2000) and A2 (2003)
Information technology equipment –
Radio
disturbance characteristics
– Limits and
methods of measurement
EN
1998
N
Information technology equipment, modems, fax machines,
BPL modems
EN
55022: 1994
01/08/2007
23
EN 55022:2006
Information technology equipment –
Radio
disturbance characteristics
– Limits and
methods of measurement
EN
2006
N
Information technology equipment, modems, fax machines,
BPL modems
EN
55022: 1998
01/10/2009
24
CISPR 22:2005 with amdts 1 (2005) and 2 (2006)
Information technology equipment –
Radio
disturbance characteristics
– Limits and
methods of measurement
CISPR
04/2005
N
Information technology equipment, modems, fax machines,
BPL modems
CISPR 22: 2003
21/12/2007
Testing radiated emissions above 1 GHz is not yet required in Australia.
25
EN 60974-10:2003
Arc welding equipment –
Part 10: Electromagnetic compatibility
(EMC)
requirements
EN
07/2003
N
Arc welding equipment
EN
50199: 1995
21/12/2007
26
IEC 60974-10:2002
Arc welding equipment –
Part 10: Electromagnetic compatibility
(EMC)
requirements
IEC
2002
N
Arc welding equipment
27
EN 50065-1:2001
Specification for signalling on
low-voltage electrical installations
in the
frequency range
3 kHz to 148.5 kHz.
General requirements, frequency
bands and electromagnetic disturbances
EN
05/11/2001
N
signalling on
low-voltage electrical installations
28
IEC 61000-3-8:1997
Electromagnetic compatibility
(EMC) - Part 3: Limits -
Section 8: Signalling on
low-voltage electrical installations - Emission
levels,
frequency
bands and electromagnetic disturbance
levels
IEC
26/09/1997
N
Signalling on
low-voltage electrical installations
29
AS 62040.2:2001
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility
(EMC)
requirements
AS
21/02/2001
N
Uninterruptible power systems (UPS)
30
EN 62040-2:2006
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility
(EMC)
requirements
EN
2006
N
Uninterruptible power systems (UPS)
EN
50091-2:1995
1/10/2008
31
IEC 62040-2:1999
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility
(EMC)
requirements
IEC
1999
N
Uninterruptible power systems (UPS)
32
IEC 62040-2:2005
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility
(EMC)
requirements
IEC
10/2005
N
Uninterruptible power systems (UPS)
IEC
62040-2:1999
10/2007
33
EN 50148:1995
Electronic taximeters
EN
1995
N
Electronic taximeters
34
EN 50263:1999
Electromagnetic compatibility (EMC). Product standard for measuring
relays and protection equipment
EN
1999
No
measuring
relays and protection equipment
35
EN 50270:1999
Electromagnetic compatibility. Electrical
apparatus
for  the
detection
and
measurement
of combustible
gases, toxic
gases or
oxygen
EN
1999
No
Electrical
apparatus
for the
detection and
measurement
of
combustible
gases, toxic
gases or
oxygen
36
EN 55103-1:1996
Electromagnetic compatibility - Product family standard for
audio, video,
audio-visual
and
entertainment lighting control apparatus for professional
use -- Part 1: Emission
EN
02/07/1996
N
Professional
audio / video equipment
37
EN 60204-31:1998
Safety of machinery - Electrical
equipment of machines --
Part 31:
Particular
safety and
EMC
requirements
for sewing machines,
units
and systems
EN
1998
N
Sewing
Machines
designed specifically
for professional
use in the
sewing
industry
38
IEC 60204-31:2001
Safety of machinery - Electrical
equipment of machines --
Part 31:
Particular
safety and
EMC
requirements
for sewing machines,
units
and systems
IEC
10/12/2001
N
Sewing
Machines
designed specifically
for
professional
use in the
sewing
industry
IEC
60204-31:1996
21/12/2007
39
EN 60439-1:1999
Low-voltage switchgear
and control
gear
assemblies --
Part 1: Type-
tested and
partially type-
tested
assemblies
EN
1999
N
Low-voltage switchgear
and control
gear
assemblies
40
IEC 60439-1:1999 with amdt 1 (2004)
Low-voltage switchgear
and control
gear
assemblies --
Part 1: Type-
tested and
partially type-
tested
assemblies
IEC
1999
N
Low-voltage
switch gear
and control
gear
assemblies
41
EN 60669-2-1:2004
Switches for household
and similar
fixed electrical installations -
Part 2-1:
Particular requirements
- Electronic
switches
EN
2004
N
Electronic
switches
for
household
and similar
use
EN 60669-2-1:2000
1/07/2009
42
IEC 60669-2-1:2002
Switches for household
and similar
fixed electrical installations -
Part 2-1:
Particular requirements - Electronic
switches
IEC
2002
N
Electronic
switches
for
household
and similar
use
43
EN 60669-2-2:1997
Switches for household and similar fixed electrical installations
- Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
EN
1997
N
Electromagnetic remote-control switches (RCS)
for household
and similar
use
44
IEC 60669-2-2:2006
Switches for household and similar fixed electrical installations
- Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
IEC
29/08/2006
N
Electromagnetic remote-control switches (RCS)
for household
and similar
use
IEC 60669-2-2:1996
29/08/2008
45
EN 60669-2-3:1997
Switches for household and similar fixed electrical installations -
Part 2-3:
Particular requirements - Time-delay switches (TDS)
EN
1997
N
Time-delay switches
(TDS)
for household
and similar
use
46
IEC 60669-2-3:2006
Switches for household and similar fixed electrical installations -
Part 2-3:
Particular requirements - Time-delay switches (TDS)
IEC
29/08/2006
N
Time-delay switches
(TDS)
for household
and similar
use
IEC 60669-2-3:1997
29/08/2008
47
EN 62053-22:2003
Electricity
metering
equipment
(a.c.) -
Particular Requirements
- Part 22:
Static meters
for
active energy (classes 0,2 S
and 0,5 S)
EN
2003
N
Static meters
for active
energy
(classes
0,2 S
and 0,5 S)
EN 60687: 1992
21/12/2007
48
IEC 62053-22:2003
Electricity
metering
equipment
(a.c.) -
Particular Requirements
- Part 22:
Static meters
for
active energy (classes 0,2 S
and 0,5 S)
IEC
28/01/2003
N
Static meters
for active
energy
(classes
0,2 S
and 0,5 S)
IEC 60687: 1992
21/12/2007
49
EN 60730-1:2000 with amdt A1 (2004)
Automatic
electrical
controls for household
and similar
use -
Part 1:
General requirements
EN
2000
N
Automatic
electrical
controls for household
and similar
use
EN 60730-1: 1995
21/12/2007
50
IEC 60730-1:1999 with amdts 1 (2003) and 2 (2007)
Automatic
electrical
controls for household
and similar
use -
Part 1:
General requirements
IEC
1999
N
Automatic
electrical
controls for household
and similar
use
51
EN 60730-2-5:2002 with amdts A1 (2004) and A11 (2005)
Automatic
electrical
controls for household
and similar
use -
Part 2-5:
Particular requirements
for automatic electrical
burner control systems
EN
2002
N
Automatic
electrical
burner control systems
for household
and similar
use
EN 60730-2-5: 1995
1/12/2008
52
IEC 60730-2-5:2000 with amdt 1 (2004)
Automatic
electrical
controls for household
and similar
use -
Part 2-5:
Particular requirements
for automatic electrical
burner control systems
IEC
2000
N
Automatic
electrical
burner control systems
for household
and similar
use
53
EN 60730-2-6:1995
Automatic
electrical
controls for household
and similar
use -
Part 2-6:
Particular requirements
for automatic electrical
pressure
sensing
controls including mechanical requirements
EN
1995
N
Automatic
electrical
pressure
sensing
controls for household
and similar
use
54
IEC 60730-2-6:2007
Automatic
electrical
controls for household
and similar
use -
Part 2-6:
Particular requirements
for automatic electrical
pressure
sensing controls including mechanical requirements
IEC
15/02/2007
N
Automatic
electrical
pressure
sensing
controls for household
and similar
use
IEC 60730-2-6: 1991
15/02/2009
55
EN 60730-2-7:1991 with amdt A1 (1997)
Automatic
electrical
controls for household
and similar
use. Part 2: Particular requirements
for timers and
time switches
EN
1991
N
Timers and
time switches
for household
and similar use
56
IEC 60730-2-7:1990 with amdt 1 (1994)
Automatic
electrical
controls for household
and similar
use. Part 2: Particular requirements
for timers and
time switches
IEC
1990
N
Timers and
time switches
for household
and similar use
57
EN 60730-2-8:2002 with amdt A1 (2003)
Automatic
electrical
controls for household
and similar
use -
Part 2-8:
Particular requirements
for electrically operated water valves,
including mechanical requirements
EN
2002
N
Electrically operated
water valves
for household
and similar
use
EN 60730-2-8: 1995
1/12/2008
58
IEC 60730-2-8:2000 with amdt 1 (2002)
Automatic
electrical
controls for household
and similar
use -
Part 2-8:
Particular requirements
for electrically operated water valves,
including mechanical requirements
IEC
2000
N
Electrically operated
water valves
for household
and similar
use
59
EN 60730-2-9:2002 with amdts A1 (2003) and A2 (2005)
Automatic
electrical
controls for household
and similar
use -
Part 2-9:
Particular requirements
for temperature sensing controls
EN
2002
N
Temperature sensing
controls
for household
and similar
use
EN 60730-2-9: 1995
1/12/2008
60
IEC 60730-2-9:2000 with amendments 1 (2002) and 2 (2004)
Automatic
electrical
controls for household
and similar
use -
Part 2-9:
Particular requirements
for temperature sensing controls
IEC
2000
N
Temperature sensing
controls
for household
and similar
use
61
EN 60730-2-11:1993 with amdts A1 (1997) and A11 (2005)
Automatic
electrical
controls for household
and similar
use -
Part 2-11: Particular requirements
for energy regulators
EN
1993
N
Energy
regulators
for household
and similar use
62
IEC 60730-2-11:2006
Automatic
electrical controls for household
and similar use - Part 2-11: Particular requirements
for energy regulators
IEC
11/10/2006
N
Energy
regulators
for household
and similar use
IEC 60730-2-11: 1993
11/10/2008
63
EN 60730-2-13:1998 with amdt A11 (2005)
Automatic
electrical
controls for household
and similar
use -
Part 2-13: Particular requirements
for humidity sensing
controls
EN
1998
N
Humidity
sensing
controls
for household
and similar use
64
IEC 60730-2-13:2006
Automatic electrical
controls for household
and similar
use -
Part 2-13: Particular requirements
for humidity sensing
controls
IEC
11/10/2006
N
Humidity
sensing
controls
for household
and similar use
IEC 60730-2-13: 1995
11/10/2008
65
EN 60730-2-14:1997 with amdt A1 (2001)
Automatic
electrical
controls for household
and similar
use -
Part 2-14: Particular requirements
for electric actuators
EN
1997
N
Electric
actuators
for household
and similar use
66
IEC 60730-2-14:1995 with amdt 1 (2001)
Automatic
electrical
controls for household
and similar
use -
Part 2-14: Particular requirements
for electric actuators
IEC
1995
N
Electric
actuators for household
and similar use
67
EN 60730-2-18:1999
Automatic
electrical
controls for household
and similar
use - Part 2:
Particular requirements
for automatic electrical
water
and air flow
sensing
controls
EN
1999
N
Automatic
electrical
water
and air flow
sensing
controls
for household
and similar
use
68
IEC 60730-2-18:1997
Automatic
electrical
controls for household
and similar
use - Part 2:
Particular requirements
for automatic electrical
water
and air flow
sensing
controls
IEC
18/02/1997
N
Automatic
electrical
water
and air flow
sensing c
ontrols
for household
and similar
use
69
EN 60870-2-1:1996
Telecontrol equipment and systems -
Part 2:
Operating conditions -
Section 1:
Power supply
and electromagnetic compatibility
EN
1996
N
Telecontrol equipment
and systems
70
IEC 60870-2-1:1995
Telecontrol equipment and systems -
Part 2:
Operating conditions -
Section 1:
Power supply
and electromagnetic compatibility
IEC
8/12/1995
N
Telecontrol equipment
and systems
71
EN 60945: 2002
Maritime navigation and radio-communication equipment and systems -
General requirements - Methods of
testing and required test results
EN
2002
N
Maritime
navigation
and radio-communication equipment and systems
72
IEC 60945:2002
Maritime navigation and radio-communication equipment and systems -
General requirements - Methods of
testing and required test results
IEC
2002
N
Maritime
navigation
and radio-communication equipment and systems
73
EN 60947-1:2004
Low-voltage
switch gear
and control
gear -
Part 1: General rules
EN
2004
N
Low voltage
switch gear
and control
gear
EN 60947-1: 1999
1/04/2007
74
IEC 60947-1:2007
Low-voltage
switch gear
and control
gear - Part 1: General rules
IEC
6/06/2007
N
Low voltage
switch gear
and control
gear
IEC 60947-1: 2004
6/06/2009
75
EN 60947-2:2003
Low-voltage switchgear
and control
gear - Part 2: Circuit-breakers
EN
2003
N
Circuit breakers
76
IEC 60947-2:2006
Low-voltage switchgear
and control
gear - Part 2: Circuit-breakers
IEC
22/05/2006
N
Circuit breakers
IEC 60947-2: 2003
22/05/2008
77
EN 60947-3:1999 with amdts A1 (2001)
Low-voltage
switch gear
and control
gear - Part 3: Switches, disconnectors, switch-disconnectors
and fuse-combination
units
EN
1999
N
Switches, disconnectors, switch-disconnectors
and fuse-combination
units
78
IEC 60947-3:1999 with amdts 1 (2001) and 2 (2005)
Low-voltage
switch gear
and control
gear - Part 3: Switches, disconnectors, switch-disconnectors
and fuse-combination
units
IEC
1999
N
Switches, disconnectors, switch-disconnectors
and fuse-combination
units
79
EN 60947-4-1:2001 with amdts A1 (2002) and A2 (2005)
Low-voltage
switch gear
and control
gear -
Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
EN
2001
N
Contactors and motor-starters - Electromechanical contactors and motor-starters
80
IEC 60947-4-1:2000 with amdts 1 (2002) and 2 (2005)
Low-voltage
switch gear
and control
gear -
Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC
2000
N
Contactors and motor-starters - Electromechanical contactors and motor-starters
81
EN 60947-4-2:2000 with amdt A1 (2002)
Low-voltage
switch gear
and control
gear -
Part 4-2: Contactors and motor-
starters - AC semiconductor motor controllers and starters
EN
2000
N
Contactors and motor-starters - AC semiconductor motor controllers and starters
82
IEC 60947-4-2:1999 with amdts 1 (2001) and 2 (2006)
Low-voltage
switch gear
and control
gear -
Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC
1999
N
Contactors and motor-starters - AC semiconductor motor controllers and starters
83
EN 60947-4-3:2000
Low-voltage
switch gear
and control
gear -
Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for
non-motor loads
EN
2000
N
Contactors and motor-starters - AC semiconductor controllers and contactors for
non-motor loads
84
IEC 60947-4-3:1999 with amdt 1 (2006)
Low-voltage
switch gear
and control
gear -
Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for
non-motor loads
IEC
1999
N
Contactors and motor-starters - AC semiconductor controllers and contactors for
non-motor loads
85
EN 60947-5-1:2004
Low-voltage
switch gear
and control
gear -
Part 5-1: Control circuit devices
and switching elements - Electromechanical control circuit devices
EN
2004
N
Control circuit devices and switching
elements - Electromechanical control circuit devices
86
IEC 60947-5-1:2003
Low-voltage
switch gear
and control
gear -
Part 5-1: Control circuit devices
and switching elements - Electromechanical control circuit devices
IEC
12/11/2003
N
Control circuit devices and switching
elements - Electromechanical control circuit devices
87
EN 60947-5-2:1998 with amdt A2 (2004)
Low-voltage
switch gear
and control
gear -
Part 5-2: Control circuit devices
and switching elements - Proximity
switches
EN
1998
N
Control circuit devices and switching
elements - Proximity
switches
88
IEC 60947-5-2:1997 with amdts 1 (1999) and 2 (2003)
Low-voltage
switch gear
and control
gear -
Part 5-2: Control circuit devices
and switching elements - Proximity
switches
IEC
1997
N
Control circuit devices and switching
elements - Proximity
switches
89
EN 60947-5-3:1999 with amdt A1 (2005)
Low-voltage
switch gear
and control
gear -
Part 5-3: Control circuit devices
and switching elements - Requirements
for proximity devices with defined
behaviour under fault conditions (PDF)
EN
1999
N
Proximity
devices with defined
behaviour
under fault conditions
90
IEC 60947-5-3:1999 with amdt 1 (2005)
Low-voltage
switch gear
and control
gear -
Part 5-3: Control circuit devices
and switching elements - Requirements
for proximity devices with defined
behaviour under fault conditions (PDF)
IEC
1999
N
Proximity
devices with defined
behaviour
under fault conditions
91
EN 60947-5-6:2000
Low-voltage
switch gear
and control
gear -
Part 5-6: Control circuit devices
and switching elements - DC interface for proximity
sensors and switching amplifiers (NAMUR)
EN
2000
N
DC interface
for proximity sensors and switching amplifiers (NAMUR)
92
IEC 60947-5-6:1999
Low-voltage
switch gear
and control
gear -
Part 5-6: Control circuit devices
and switching elements - DC interface for proximity
sensors and switching amplifiers (NAMUR)
IEC
17/12/1999
N
DC interface
for proximity sensors and switching amplifiers (NAMUR)
93
EN 60947-6-1:2005
Low-voltage
switch gear
and control
gear -
Part 6-1: Multiple function
equipment - Transfer
switching equipment
EN
2005
N
Multiple function equipment - Transfer
switching equipment
EN 60947-6-1: 1991
1/10/2008
94
IEC 60947-6-1:2005
Low-voltage
switch gear
and control
gear -
Part 6-1: Multiple function
equipment - Transfer
switching equipment
IEC
31/08/2005
N
Multiple function equipment - Transfer
switching equipment
IEC 60947-6-1: 1989
31/08/2007
95
EN 60947-6-2:2003
Low-voltage
switch gear
and control
gear -
Part 6-2: Multiple function
equipment - Control and protective switching
devices (or equipment)
(CPS)
EN
2003
N
Multiple function equipment - Control and protective switching
devices (or equipment)
(CPS)
96
IEC 60947-6-2:2002 with amdt 1 (2007)
Low-voltage
switch gear
and control
gear -
Part 6-2: Multiple function
equipment - Control and protective switching
devices (or equipment)
(CPS)
IEC
2002
N
Multiple function equipment - Control and protective switching
devices (or equipment)
(CPS)
97
EN 61008-1:2004
Residual current operated
circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) -
Part 1: General rules
EN
2004
N
Residual current operated
circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs
EN 61008-1: 1994
1/04/2009
98
IEC 61008-1:1996 with amdts 1 (2002) and 2 (2006)
Residual current operated
circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) -
Part 1: General rules
IEC
1996
N
Residual current operated
circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs
99
EN 62053-21:2003
Electricity
metering equipment
(a.c.) - Particular requirements - Part 21: Static meters for
active energy (classes 1
and 2)
EN
2003
N
Static meters
for active
energy
(classes 1
and 2)
100
IEC 62053-21:2003
Electricity
metering equipment
(a.c.) - Particular requirements - Part 21: Static meters for
active energy (classes 1
and 2)
IEC
2003
N
Static meters
for active
energy
(classes 1
and 2)
101
EN 62054-11:2004
Electricity
metering (a.c.) - Tariff and load control -
Part 11:
Particular requirements
for electronic ripple control receivers
EN
2004
N
Electronic
ripple control receivers
102
IEC 62054-11:2004
Electricity
metering (a.c.) - Tariff and load control -
Part 11:
Particular requirements
for electronic ripple control receivers
IEC
2004
N
Electronic
ripple control receivers
103
EN 62054-21:2004
Electricity
metering (a.c.) - Tariff and load control -
Part 21:
Particular requirements
for time switches
EN
2004
N
Time switches
104
IEC 62-54-21:2004
Electricity
metering (a.c.) - Tariff and load control -
Part 21:
Particular requirements
for time switches
IEC
2004
N
Time switches
105
EN 62053-23:2003
Electricity
metering equipment (a.c.) - Particular requirements - Part 23: Static meters for
reactive energy (classes 2 and 3)
EN
2003
N
Static meters
for reactive
energy
(classes 2
and 3)
106
IEC 62053-23:2003
Electricity
metering equipment (a.c.) - Particular requirements - Part 23: Static meters for
reactive energy (classes 2 and 3)
IEC
2003
N
Static meters
for reactive
energy
(classes 2
and 3)
107
EN 61326:1997 with amdts A1 (1998), A2 (2001) and A3 (2003)
Electrical equipment for measurement, control and laboratory use - EMC
requirements
EN
1997
N
Electrical equipment for measurement, control and laboratory use
108
IEC 61326-1:2005
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements
IEC
15/12/2005
N
Electrical equipment for measurement, control and laboratory use
IEC 61326: 2002
15/12/2007
109
EN 61543:1995 with amdts A11 (2003), A12 (2005) and A2 (2006)
Residual current-operated protective
devices (RCDs)
for household
and similar use - Electromagnetic compatibility
EN
1995
N
Residual current-operated protective
devices (RCDs)
for household
and similar use
110
IEC 61543:1995 with amdts 1 (2004) and 2 (2005)
Residual current-operated protective
devices (RCDs)
for household
and similar use - Electromagnetic compatibility
IEC
1995
N
Residual current-operated protective
devices (RCDs
for household
and similar use
111
EN 61800-3:2004
Adjustable speed electrical power drive systems - Part 3: EMC requirements
and specific test methods
EN
2004
N
Adjustable
speed electrical power drive systems
EN 61800-3: 1996
1/10/2007
112
IEC 61800-3:2004
Adjustable speed electrical power drive systems - Part 3: EMC requirements
and specific test methods
IEC
12/08/2004
N
Adjustable
speed electrical power drive systems
113
EN 61812-1:1996 with amendment A11 (2000)
Specified time relays for industrial use - Part 1: Requirements
and tests
EN
1996
N
Specified time relays for industrial use
114
IEC 61812-1:1996
Specified time relays for industrial use - Part 1: Requirements
and tests
IEC
1996
N
Specified time relays for industrial use
115
EN 300 386 v1.3.3
Electromagnetic compatibility and Radio spectrum Matters (ERM); Tele-communication network equipment; ElectroMagnetic Compatibility (EMC) requirements
EN
2005
N
Tele-communication network equipment
Example:
A new laptop computer is imported into Australia on 20/08/2007. The supplier can use a test report to either AS/NZS CISPR 22:2004 or AS/NZS CISPR 22:2006 to show compliance. The supplier then imports a different new laptop computer on 3/06/2008. The supplier can now only use a test report to AS/NZS CISPR 22:2006. A test report to the earlier version is no longer acceptable.
Why?
From the table (extract below) we can see that AS/NZS CISPR 22:2006 was published on 2/06/2006 (column 5) and replaces AS/NZS CISPR 22:2004 (column 8).  Until 2/06/2008 which is the expiry date of the replaced standard (column 9), a supplier may use either AS/NZS CISPR 22:2004 or AS/NZS CISPR 22:2006 to show compliance.
From 2/06/2008 (column 9), only AS/NZS CISPR 22:2006 can be used.
Note that the remarks in column 10 state that testing above 1 GHz is not yet required in Australia . Therefore the supplier of the laptop computer would not be required to prove compliance of the laptop above 1 GHz.
1
2
3
4
5
6
7
8
9
10
Serial
Applicable Standard
Full Title of Standard
Source of Std
Publication Date
Vari-ation Y/N
Brief description of equipment to which standard should apply
Standard being
replaced

Expiry Date of replaced standard
Remarks
21
AS/NZS CISPR 22:2006
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
AS/NZS
02/06/2006
N
Information technology equipment, modems, fax machines, BPL modems
AS/NZS CISPR 22:2004
02/06/2008
Testing radiated emissions above 1 GHz is not yet required in Australia.
 

http://www.acma.gov.au/WEB/STANDARD/1001/pc=PC_310707

本文由fasten在供参考的旧版安规网发表,建议进入新版交流!

灯头量规

本帖最近评分记录:
  • 安规金币:+20(timothy) 优秀文章
  • 安规金币:+50(yaya) 标准资料
  • 非商业性技术论坛!严禁任何形式广告!宽容+理解,共建和谐家园!
    搜索是最好的工具,请学会搜索!请注意提问的技巧,说清楚问题!
    备份站 | 留言 | FAQ | QQ群 | 认证工具 | 付款方式 | 广告服务 | 整站教程 | 国标下载 | 安规博客
    skype: fasten163 - MSN: fasten163@163.com - Mail:fasten163@sina.com
    顶端 Posted: 2008-06-27 15:44 | [楼 主]    新版 | 旧版安规网
    fasten


    级别: 安规管理员
    精华: 5
    发帖: 7239
    安规威望: 1727 点
    安规金币: 227 个
    安规宣传: 1 次
    在线时间:8425(小时)
    注册时间:2007-05-10
    最后登录:2020-05-27

    Queensland Electrical Safety Regulation

    #000000]http://www.acma.gov.au/WEB/STANDARD/pc=PC_310707
    #000000]http://www.legislation.qld.gov.au/LEGISLTN/CURRENT/E/ElectricalSR02.pdf

    本文由fasten在供参考的旧版安规网发表,建议进入新版交流!
    附件: ElectricalSR02.pdf (1005 K) 下载次数:61

    非商业性技术论坛!严禁任何形式广告!宽容+理解,共建和谐家园!
    搜索是最好的工具,请学会搜索!请注意提问的技巧,说清楚问题!
    备份站 | 留言 | FAQ | QQ群 | 认证工具 | 付款方式 | 广告服务 | 整站教程 | 国标下载 | 安规博客
    skype: fasten163 - MSN: fasten163@163.com - Mail:fasten163@sina.com
    顶端 Posted: 2008-06-27 15:47 | 1 楼    新版 | 安规网
    Joliny




    级别: 安规工程师
    精华: 0
    发帖: 132
    安规威望: 23 点
    安规金币: 275 个
    安规宣传: 0 次
    在线时间:152(小时)
    注册时间:2008-01-27
    最后登录:2019-03-18

    水泵有强制要求吗?
    出澳大利亚的产品,贴该标志一定要做过C-TICK认证备案吗?不备案直接贴该标志有何后果啊?
    谢谢!

    本文由Joliny在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2008-09-04 15:42 | 2 楼    新版 | 安规网
    wwnw_007


    级别: 退休版主
    精华: 1
    发帖: 9595
    安规威望: 128 点
    安规金币: 43110 个
    安规宣传: 0 次
    在线时间:7800(小时)
    注册时间:2007-09-01
    最后登录:2011-12-18

    115种产品出口澳洲需要强制认证啦!

    本文由wwnw_007在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2009-02-20 08:07 | 3 楼    新版 | 安规网
    MIGllo




    级别: 安规新人
    精华: 0
    发帖: 13
    安规威望: 7 点
    安规金币: 168 个
    安规宣传: 0 次
    在线时间:15(小时)
    注册时间:2009-02-09
    最后登录:2009-12-24

    沒在強制執行的就不一定要認證.

    本文由MIGllo在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2009-10-27 14:32 | 4 楼    新版 | 安规网
    hiker


    级别: 安规学徒
    精华: 0
    发帖: 234
    安规威望: 29 点
    安规金币: 34 个
    安规宣传: 0 次
    在线时间:242(小时)
    注册时间:2008-08-22
    最后登录:2014-07-10

    ACMA是什么机构啊!

    本文由hiker在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-07-02 16:47 | 5 楼    新版 | 安规网
    WatsonOwen




    级别: 安规新人
    精华: 0
    发帖: 27
    安规威望: 4 点
    安规金币: 76 个
    安规宣传: 0 次
    在线时间:14(小时)
    注册时间:2010-07-07
    最后登录:2011-02-22

    下载学习 时间很短了 不知道有没有中文版的 现下载这个英文版好了 谢谢

    本文由WatsonOwen在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-07-07 23:37 | 6 楼    新版 | 安规网
    一二




    级别: 安规新人
    精华: 0
    发帖: 2
    安规威望: 4 点
    安规金币: 101 个
    安规宣传: 0 次
    在线时间:0(小时)
    注册时间:2010-08-11
    最后登录:2010-11-23

    可以看喽,呵呵!

    本文由一二在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2010-08-11 10:38 | 7 楼    新版 | 安规网
    fasten


    级别: 安规管理员
    精华: 5
    发帖: 7239
    安规威望: 1727 点
    安规金币: 227 个
    安规宣传: 1 次
    在线时间:8425(小时)
    注册时间:2007-05-10
    最后登录:2020-05-27

    Alert: Changes to ACMA labelling arrangements from 1 March 2013.
    New single compliance mark – RCM. Further information is available.
    The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as a mandatory standard under section 162 of the Radiocommunications Act 1992 as part of the ACMA's Electromagnetic Compatibility (EMC) Regulatory Arrangement.

    Part 1 Generic standards
    1 2 3 4 5 6 7 8 9
    Serial
    Applicable Standard
    Full Title of Standard
    Publi-cation Date
    Vari-ation Y/N Brief description of equipment to which standard should apply
    Standard being replaced
    Expiry Date of replaced standard
    Remarks
    G1
    AS/NZS 4251.1: 1999
    Electromagnetic compatibility (EMC) – Generic emission standard – Part 1: Residential, commercial and light industry
    05/03/1999
    N
    All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    AS/NZS 4251.1:1994
    21/12/2007
    Harmonics and Flicker are not required
    EXPIRED 31/05/2009
    AS/NZS 61000.6.3: 2007 Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments
    31/05/2007
    N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    AS/NZS 4251.1:1999
    31/05/2009
    Harmonics and Flicker are not required
     
    EN 61000-6-3: 2001 + A11 (2004)
    Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
    2001
    N
    All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    EN 50081.1:1992
    21/12/2007
    Harmonics and Flicker are not required
    EXPIRED 01/12/2009
     
    EN 61000-6-3: 2007
    Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
    2007
    N
    All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    EN 61000-6-3: 2001 + A11 (2004)
    01/12/2009 Harmonics and Flicker are not required
    Due to expire 12/01/2014
    EN 61000-6.3:2007/A1:2011 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
    2007 N All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    EN 61000-6-3: 2007
    12/01/2014 Harmonics and Flicker are not required
     
    IEC 61000-6-3:2006
    Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
    17/07/2006
    N
    All equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards
    IEC 61000-6-3:1996
    17/07/2008
    Harmonics and Flicker are not required
    G2
    AS/NZS 4251.2: 1999
    Electromagnetic compatibility (EMC) – Generic emission standard – Part 2: Industrial environments
    05/03/1999
    N
    All equipment intended for use in an industrial environment that is not covered by one of the product family standards - - Harmonics and Flicker are not required
    EXPIRED 31/05/2009
    G3
    AS/NZS 61000.6.4: 2007
    Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission standard for industrial environments
    31/05/2007
    N
    All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    AS/NZS 4251.2:1999
    31/05/2009
    Harmonics and Flicker are not required
     
    EN 61000-6-4:2001
    Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
    2001
    N
    All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    EN 50081-2:1993
    21/12/2007
    Harmonics and Flicker are not required
    EXPIRED 01/12/2009
    EN 61000-6-4:2007
    Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
    02/03/2007 N All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    EN 61000-6-4:2001
    01/12/2009 Harmonics and Flicker are not required
    Due to expire 12/01/2014 
    EN 61000-6-4:2007/A1:2011
    Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
    N All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    EN 61000-6-4:2007
    12/01/2014 Harmonics and Flicker are not required
     
    IEC 61000-6-4:1997
    Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
    1997
    N
    All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    - - Harmonics and Flicker are not required
    EXPIRED 10/07/2008
     
    IEC 61000-6-4:2006
    Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
    10/07/2006
    N
    All equipment intended for use in an industrial environment that is not covered by one of the product family standards
    IEC 61000-6-4:1997
    10/07/2008
    Harmonics and Flicker are not required


    Part 2 Product family and equipment standards
    1
    2
    3
    4
    5
    6
    7
    8
    9 
    Serial
    Applicable Standard
    Full Title of Standard
    Publication Date
    Vari-ation Y/N
    Brief description of equipment to which standard should apply
    Standard being replaced
    Expiry Date of replaced standard
    Remarks
    1 EN 50083-2:2006
    Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic Compatibility for Equipment
    03/08/2006 N Cable networks for television signals, sound signals and interactive services
    EN 50083-2:2001
    + A1:2005
    01/04/2009 Due to expire 21/06/2013
    EN 50083-2:2012
    Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic Compatibility for Equipment
    N Cable networks for television signals, sound signals and interactive services EN 50083-2:2006
    21/06/2013
    2 IEC 60728-2:2002
    Cabled distribution systems for television and sound signals- Part 2: Electromagnetic Compatibility for Equipment
    22/10/2002 N Cabled distribution systems for television and sound signals
    - - -
    3
    AS/NZS CISPR 11:2004 (2nd Edition)
    Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    25/11/2004
    N
    Industrial scientific and medical (ISM) radio-frequency equipment
    AS/NZS 2064
    21/12/2007
    Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
    AS/NZS CISPR 11:2011 Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    30/11/2010 (AU)
    10/12/2010 (NZ)
    N Industrial scientific and medical (ISM) radio-frequency equipment
    AS/NZS CISPR 11:2004 Ed 2 17/11/2013 Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
     
    CISPR 11:2003 with amdts 1 (2004) and 2 (2006)
    Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    06/2003
    N
    Industrial scientific and medical (ISM) radio-frequency equipment
    CISPR 11:
    21/12/2007
    Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
    CISPR 11:2010
    (CISPR 11:2009 with amdt 1-2010
    Edition 5.1
    Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    19/05/2010 N Industrial scientific and medical (ISM) radio-frequency equipment
    CISPR 11:2003 with amdts 1 (2004) and 2 (2006) 17/11/2013 Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
     
    EN 55011:1998 + A1:1999
    + A2:2002
    Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    1998
    N
    Industrial scientific and medical (ISM) radio-frequency equipment
    EN 55011:
    21/12/2007
    EXPIRED 01/11/2009
    EN 55011:2007 + A2:2007
    Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    2007 N Industrial scientific and medical (ISM) radio-frequency equipment
    EN 55011:1998
    + A1:1999
    + A2:2002
    01/11/2009 EXPIRED 01/09/2012
    EN 55011:2009 Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    2009 N Industrial scientific and medical (ISM) radio-frequency equipment
    EN 55011:2007 
    and its amendment 
    01/09/2012 Note: The ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. Devices operating outside 915-928 MHz are not acceptable in Australia.
    Due to expire 01/07/2013
    EN 55011:2009/A1:2010 Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
    N Industrial scientific and medical (ISM) radio-frequency equipment
    EN 55011:2009 01/07/2013
    AS/NZS CISPR 12:2006
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    02/06/2006
    N
    Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    AS/NZS CISPR 12:2004
    02/06/2008
    EXPIRED
    04/10/2012
    AS/NZS CISPR 12:2009 Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
    22/06/2009
    N Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    AS/NZS CISPR 12:2006 04/10/2012
    EN 55012:2002 
    + A1:2005
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    2002 N Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    Generic 21/12/2007 EXPIRED
    01/09/2010
     
    EN 55012:2007
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board of receivers
    2007
    N
    Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    EN 55012:2002 +A1:2005
    01/09/2010
    EXPIRED 01/07/2012
    EN 55012:2007/A1:2009
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board of receivers
    N Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    EN 55012:2007
    01/07/2012
     
    CISPR 12:2001 with amdt 1 (2005)
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    09/2001
    N
    Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    CISPR 12:1997
    21/12/2007
    EXPIRED 23/05/2009
     
    CISPR 12:2007
    Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    23/05/2007
    N
    Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines
    CISPR 12:2001
    23/05/2009
    -
    5
    AS/NZS CISPR 13:2004
    Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
    06/06/2004
    N
    Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
    AS/NZS 1053
    21/12/2007
    -
    AS/NZS CISPR 13:2012
    Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
    27/06/2012 N Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
    AS/NZS CISPR 13:2004
    27/06/2014 -
     
    EN 55013:2001
    + A1:2003
    Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
    2001
    N
    Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
    EN 55013:1990 and its amendments
    01/09/2004
    EXPIRED 01/03/2009
    EN 55013:2001/A2:2006
    Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
    N Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
    EN 55013:2001
    + A1:2003
    01/03/2009
     
    CISPR 13:2006
    (Consolidated edition of CISPR 13:2001 with amdts 1 (2003) and 2 (2006))
    Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
    2001
    N
    Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment
    CISPR 13
    21/12/2007
    -
    6
    AS/NZS CISPR 14.1:2003
    Electromganetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    09/10/2003
    N
    Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    AS/NZS 1044:
    21/12/2007
    EXPIRED 04/10/2012
    AS/NZS CISPR 14.1:2010 Electromganetic Compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emissions
    03/03/2010
    N Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    AS/NZS CISPR 14.1:2003
    04/10/2012
     
    EN 55014-1:2000
    + A1:2001
    + A2:2002
    Electromganetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    2000
    N
    Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    EN 55014-1:
    21/12/2007
    EXPIRED 01/09/2009
    EN 55014-1:2006
    Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    2006 N Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    EN 55014-1:2000
    + A1:2001
    + A2:2002
    01/09/2009 EXPIRED 01/05/2012
    EN 55014-1:2006/ A1:2009
    Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    2006 N Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    EN 55014-1:2006 01/05/2012 Due to expire 16/08/2014
    EN 55014-1:2006/A2:2011
    Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    2006 N Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    EN 55014-1:2006 + A1:2009
    16/08/2014
     
    CISPR 14-1:2000 with amdts 1 (2001) and 2 (2002)
    Electromganetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    2000
    N
    Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    CISPR 14-1
    21/12/2007
    EXPIRED 21/12/2007
     
    CISPR 14-1:2009
    (Consolidated edition of CISPR 14-1:2005 with amdt 1 (2008))
    Electromganetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
    11/02/2009
    (11/11/2005 )
    N
    Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances
    CISPR 14-1:2000
    with amdts 1 (2001) and 2 (2002)
    21/12/2007
    -
    7
    AS/NZS CISPR 15:2002
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    13/03/2002
    Y
    Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    AS/NZS 4051
    21/12/2007
    EXPIRED 02/06/2008
     
    AS/NZS CISPR 15:2006
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    02/06/2006
    N
    Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    AS/NZS CISPR 15:2002
    02/06/2008
    EXPIRED
    09 Feb 2013
    AS/NZS CISPR 15:2011
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    20/12/2011 Y Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    AS/NZS CISPR 15:2006
    09/02/2013 Testing above 30 MHz will be mandatory from
    9 Feb 2013
     
    EN 55015:2000
    + A1:2001
    + A2:2002
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    2000
    N
    Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    EN 55015
    21/12/2007
    EXPIRED 01/09/2009
    EN 55015:2006
    + A1:2007
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    2006 N Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    EN 55015:2000
    + A1:2001
    + A2:2002
    01/09/2009 Testing above 30 MHz will be mandatory from
    9 Feb 2013
    EXPIRED 01/03/2012
    EN 55015:2006
    /A2:2009
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    N Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    EN 55015:2006
    + A1:2007
    01/03/2012
     
    CISPR 15:2009
    (Consolidated edition of CISPR 15:2005 with amdt 1 (2006) and amdt 2(2008))
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    12/01/2009
    (2005)
    N
    Lighting equipment, lighting accessories such as ballasts, transformers, dimmers
    CISPR 15:2000
    21/12/2007
    Testing above 30 MHz will be mandatory from
    9 Feb 2013
    8
    AS/NZS CISPR 22:2004
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    06/07/2004
    N
    Information technology equipment, modems, fax machines, BPL modems
    AS/NZS 3548
    21/12/2007
    EXPIRED 02/06/2008
     
    AS/NZS CISPR 22:2006
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    02/06/2006
    N
    Information technology equipment, modems, fax machines, BPL modems
    AS/NZS CISPR 22:2004
    02/06/2008
    EXPIRED 04/10/2012
    AS/NZS CISPR 22:2009 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    21/08/2009 N Information technology equipment, modems, fax machines, BPL modems
    AS/NZS CISPR 22:2006
    04/10/2012 Testing radiated emissions above 1 GHz is required from 1/10/2011.
    AS/NZS CISPR 22:2009 with Amdt 1 (2010) Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    01/12/2010 N Information technology equipment, modems, fax machines, BPL modems
    AS/NZS CISPR 22:2009 01/12/2013 Testing radiated emissions above 1 GHz is required from 1/10/2011.
     
    EN 55022:1998
    + A1:2000
    + A2:2003
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    1998
    N
    Information technology equipment, modems, fax machines, BPL modems
    EN 55022: 1994
    01/08/2007
    EXPIRED 01/10/2011
    EN 55022:2006 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    2006 N Information technology equipment, modems, fax machines, BPL modems EN 55022:1998
    + A1:2000
    + A2:2003
    01/10/2011 Testing radiated emissions above 1 GHz is required from 1/10/2011.
    EXPIRED 01/10/2011
     
    EN 55022:2006 /A1:2007 
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    2006
    N
    Information technology equipment, modems, fax machines, BPL modems
    EN 55022:2006
    01/10/2011
    Testing radiated emissions above 1 GHz is required from 1/10/2011.
    Due to expire 01/12/2013
    EN 55022:2010 + AC:2011 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    2010 Y Information technology equipment, modems, fax machines, BPL modems
    EN 55022:2006 and its amendments 01/12/2013 Testing radiated emissions above 1 GHz is required from 1/10/2011.
     
    CISPR 22:2005 with amdts 1 (2005) and 2 (2006)
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    04/2005
    N
    Information technology equipment, modems, fax machines, BPL modems
    CISPR 22: 2003
    21/12/2007
    Testing radiated emissions above 1 GHz is required from 1/10/2011.
    CISPR 22: 2008
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    24/09/2008 N Information technology equipment, modems, fax machines, BPL modems
    CISPR 22:2006
    24/09/2010 Testing radiated emissions above 1 GHz is required from 1/10/2011.
    9
    EN 60974-10:2003
    Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
    07/2003
    N
    Arc welding equipment
    EN 50199: 1995
    21/12/2007
    EXPIRED 01/12/2010
    EN 60974-10:2007
    Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
    2007 N Arc welding equipment
    EN 60974-10:2003
    01/12/2010 -
     
    IEC 60974-10:2002
    Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
    2002
    N
    Arc welding equipment
    EXPIRED 29/08/2009
    IEC 60974-10:2007
    Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
    29/08/2007
    N Arc welding equipment
    IEC 60974-10:2004
    29/08/2009
    -
    10
    EN 50065-1:2001
    Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
    05/11/2001
    N
    Signalling on low-voltage electrical installations
    EN 50065-1:1991
    +A1:1992
    +A2:1995
    +A3:1996
    01/04/2003 EXPIRED 01/10/2012
    EN 50065-1:2001/A1:2010
    Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
    N Signalling on low-voltage electrical installations
    EN 50065-1:2001
    01/10/2012 Due to expire 21/03/2014
    EN 50065-1:2011
    Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances
    N Signalling on low-voltage electrical installations
    EN 50065-1:2001/A1:2010
    21/03/2014
    11
    IEC 61000-3-8:1997
    Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
    26/09/1997
    N
    Signalling on low-voltage electrical installations
    - - -
    12
    AS 62040.2:2001
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    21/02/2001
    N
    Uninterruptible power systems (UPS)
    - - EXPIRED 19/03/2010
    Immunity, harmonics and flicker are not required
    AS 62040.2:2008
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    19/03/2008 N Uninterruptible power systems (UPS)
    AS 62040.2 :2001
    19/03/2010
    Immunity, harmonics and flicker are not required
     
    EN 62040-2:2006
    + AC:2006
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    2006
    N
    Uninterruptible power systems (UPS)
    EN 50091-2:1995
    01/10/2008
    -
     
    IEC 62040-2:1999
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    1999
    N
    Uninterruptible power systems (UPS)
    - - EXPIRED 21/12/2007
     
    IEC 62040-2:2005
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
    10/2005
    N
    Uninterruptible power systems (UPS)
    IEC 62040-2:1999
    21/12/2007
    -
    13
    EN 50148:1995
    Electronic taximeters
    1995
    N
    Electronic taximeters
    Relevant generic standards 15/12/1995 -
    14
    EN 50263:1999
    Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
    1999
    N
    Measuring relays and protection equipment
    Relevant generic standards 01/08/2002 -
    15
    EN 50270:1999
    Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
    1999
    N
    Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
    - - EXPIRED 01/06/2009
    EN 50270:2006
    Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
    2006 N Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
    EN 50270:1999
    01/06/2009 -
    16
    EN 55103-1:1996
    Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
    02/07/1996
     
    Professional audio / video equipment
    Relevant generic standards 01/09/1999 EXPIRED 01/07/2012
    EN 55103-1:2009
    Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission N Professional audio / video equipment EN 55103-1:1996
    01/07/2012
    17
    EN 60204-31:1998
    +AC:2000
    Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
    1998
    N
    Sewing Machines designed specifically for professional use in the sewing industry
    Relevant generic standards 01/06/2002 -
     
    IEC 60204-31:2001
    Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
    10/12/2001
    N
    Sewing Machines designed specifically for professional use in the sewing industry
    IEC 60204-31:1996
    21/12/2007
    -
    18
    EN 60439-1:1999
    Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies
    1999
    N
    Low-voltage switch gear and control gear assemblies
    EN 60439-1:1994
    + A11:1996
    01/08/2002 Due to expire 01/11/2014
    EN 61439-1:2009
    Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies
    N Low-voltage switch gear and control gear assemblies
    EN 60439-1:1999
    01/11/2014 Due to expire 23/09/2014
    EN 61439-1:2011
    Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies
    N Low-voltage switch gear and control gear assemblies
    EN 61439-1:2009
    23/09/2014
     
    IEC 60439-1:2004
    Low-voltage switchgear and control gear assemblies - Part 1: Type-tested and partially type-tested assemblies
    2004
    N
    Low-voltage switch gear and control gear assemblies
    - - EXPIRED 22/01/2011
    IEC 61439-1:2009
    Low-voltage switchgear and control gear assemblies - Part 1: General rules
    22/01/2009 N Low-voltage switch gear and control gear assemblies
    IEC 60439-1:2004
    22/01/2011 -
    19
    EN 60669-2-1:2004
    + AC:2007
    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    2004
    N
    Electronic switches for household and similar use
    EN 60669-2-1:2000
    +A2:2001
    01/07/2009
    EXPIRED 01/04/2012
    EN 60669-2-1:2004/A1:2009
    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    N Electronic switches for household and similar use
    EN 60669-2-1:2004
    01/04/2012 Due to expire 01/06/2013
    EN 60669-2-1:2004/A12:2010
    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    N Electronic switches for household and similar use
    EN 60669-2-1:2004
    + A1:2009
    01/06/2013
     
    IEC 60669-2-1:2002
    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    2002
    N
    Electronic switches for household and similar use
    - - EXPIRED 28/01/2011
    IEC 60669-2-1:2009
    Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
    28/01/2009 N Electronic switches for household and similar use
    IEC 60669-2-1:2002
    28/01/2011 -
    20
    EN 60669-2-2:1997
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
    1997
    N
    Electromagnetic remote-control switches (RCS) for household and similar use
    - - -
     
    IEC 60669-2-2:2006
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
    29/08/2006
    N
    Electromagnetic remote-control switches (RCS) for household and similar use
    IEC 60669-2-2:1996
    29/08/2008
    -
    21
    EN 60669-2-3:1997
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
    1997
    N
    Time-delay switches (TDS) for household and similar use
    - - -
     
    IEC 60669-2-3:2006
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
    29/08/2006
    N
    Time-delay switches (TDS) for household and similar use
    IEC 60669-2-3:1997
    29/08/2008
    -
    22
    EN 62053-22:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
    2003
    N
    Static meters for active energy (classes 0,2 S and 0,5 S)
    EN 60687:1992
    01/03/2006
    -
     
    IEC 62053-22:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
    28/01/2003
    N
    Static meters for active energy (classes 0,2 S and 0,5 S)
    IEC 60687:1992
    21/12/2007
    -
    23
    EN 60730-1:2000 
    + A1:2004
    + AC:2007
    Automatic electrical controls for household and similar use - Part 1: General requirements
    2000
    N
    Automatic electrical controls for household and similar use
    EN 60730-1:1995 and its amendments
    21/12/2007
    EXPIRED 01/06/2010
    EN 60730-1:2000 /A16:2007
    + AC:2010
    Automatic electrical controls for household and similar use - Part 1: General requirements N Automatic electrical controls for household and similar use
    EN 60730-1:2000 
    + A1:2004
    01/06/2010 EXPIRED 01/06/2011
    EN 60730-1:2000/A2:2008 Automatic electrical controls for household and similar use - Part 1: General requirements N Automatic electrical controls for household and similar use
    EN 60730-1:2000 /A16:2007
    01/06/2011 Due to expire 01/10/2013
    EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements N Automatic electrical controls for household and similar use
    EN 60730-1:2000 and its amendments
    01/10/2013
     
    IEC 60730-1:2007
    (Consolidated edition of IEC 60730-1:1999 with amdts 1 (2003) and 2 (2007))
    Automatic electrical controls for household and similar use - Part 1: General requirements
    28/03/2007
    (1999)
    N
    Automatic electrical controls for household and similar use
    - - -
    24
    EN 60730-2-5:2002 +A1:2004 
    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
    2002
    N
    Automatic electrical burner control systems for household and similar use
    EN 60730-2-5:1995
    +A1:1996
    +A2:1998
    EXPIRED 01/12/2008
    EN 60730-2-5:2002/A11:2005
    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
    N Automatic electrical burner control systems for household and similar use
    EN 60730-2-5:2002 +A1:2004 
    01/12/2008 EXPIRED
    01/03/2013
    EN 60730-2-5:2002/A2:2010
    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
    N Automatic electrical burner control systems for household and similar use
    EN 60730-2-5:2002/A11:2005 01/03/2013
     
    IEC 60730-2-5:2009
    (Consolidated edition of IEC 60730-2-5:2000 with A1:2004 +A2:2008)
    Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
    25/02/2009
    (2000)
    N
    Automatic electrical burner control systems for household and similar use
    - - -
    25
    EN 60730-2-6:1995 + A1:1997
    Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
    1995
    N
    Automatic electrical pressure sensing controls for household and similar use
    - - EXPIRED 01/07/2011
    EN 60730-2-6:2008
    Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements N Automatic electrical pressure sensing controls for household and similar use
    EN 60730-2-6:1995 + A1:1997
    01/07/2011
     
    IEC 60730-2-6:2007
    Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
    15/02/2007
    N
    Automatic electrical pressure sensing controls for household and similar use
    IEC 60730-2-6:1991
    15/02/2009
    -
    26
    EN 60730-2-7:1991
    + AC:2001
    + AC:1997
    Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches
    1991
    N
    Timers and time switches for household and similar use
    - - EXPIRED 01/01/2004
    EN 60730-2-7:1991/A1:1997
    +AC:2001 
    Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches
    N Timers and time switches for household and similar use
    EN 60730-2-7:1991
    + AC:2001
    + AC:1997
    01/01/2004 Due to expire 01/10/2013
    EN 60730-2-7:2010 Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches
    N Timers and time switches for household and similar use
    EN 60730-2-7:1991 and its amendment 01/10/2013
     
    IEC 60730-2-7:1990 with amdt 1 (1994)
    Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches
    1990
    N
    Timers and time switches for household and similar use
    - - EXPIRED 14/04/2010
    IEC 60730-2-7:2008
    Automatic electrical controls for household and similar use. Part 2: Particular requirements for timers and time switches
    14/04/2008 N Timers and time switches for household and similar use
    IEC 60730-2-7:1990 with amdt 1 (1994)
    14/04/2010 -
    27
    EN 60730-2-8:2002
    Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
    2002
    N
    Electrically operated water valves for household and similar use
    EN 60730-2-8: 1995
    + A1:1997
    + A2:1997
    01/12/2008
    EXPIRED 01/12/2008
    EN 60730-2-8:2002
    /A1:2003
    Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
    N Electrically operated water valves for household and similar use EN 60730-2-8:2002
    01/12/2008
     
    IEC 60730-2-8:2003
    (Consolidated edition of IEC 60730-2-8:2000 with amdt 1:2002)
    Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
    30/01/2003
    N
    Electrically operated water valves for household and similar use
    - - -
    28
    EN 60730-2-9:2002

    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    2002
    N
    Temperature sensing controls for household and similar use
    EN 60730-2-9: 1995
    + A1:1996
    + A2:1997
    01/12/2008
    EXPIRED 01/12/2008 
    EN 60730-2-9:2002
    /A1:2003
    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    N Temperature sensing controls for household and similar use
    EN 60730-2-9:2002

    01/12/2008 EXPIRED 01/12/2007
    EN 60730-2-9:2002
    /A2:2005
    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    N Temperature sensing controls for household and similar use
    EN 60730-2-9:2002
    + A1:2003
    01/12/2007 Due to expire 01/11/2013
    EN 60730-2-9:2010
    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    N Temperature sensing controls for household and similar use
    EN 60730-2-9:2002 and its amendments
    01/11/2013
     
    IEC 60730-2-9:2000 with amendments 1 (2002) and 2 (2004)
    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    2000
    N
    Temperature sensing controls for household and similar use
    - - EXPIRED 25/06/2010
    IEC 60730-2-9:2008
    Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    25/06/2008 N Temperature sensing controls for household and similar use
    IEC 60730-2-9:2000 with amendments 1 (2002) and 2 (2004)
    25/06/2010 -
    29
    EN 60730-2-11:1993
    + A1:1997
    + A11:2005
    Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators
    1993
    N
    Energy regulators for household and similar use
    - - -
     
    IEC 60730-2-11:2006
    Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators
    11/10/2006
    N
    Energy regulators for household and similar use
    IEC 60730-2-11:1993
    11/10/2008
    -
    30
    EN 60730-2-13:1998
    + A11:2005
    Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls
    1998
    N
    Humidity sensing controls for household and similar use
    - - -
     
    IEC 60730-2-13:2006
    Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls
    11/10/2006
    N
    Humidity sensing controls for household and similar use
    IEC 60730-2-13:1995
    11/10/2008
    -
    31
    EN 60730-2-14:1997

    Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
    1997
    N
    Electric actuators for household and similar use
    EN 60730-1:1995 and its amendments 01/06/2004 EXPIRED 01/07/2008
    EN 60730-2-14:1997
    /A1:2001
    Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
    N Electric actuators for household and similar use
    EN 60730-2-14:1997

    01/07/2008
     
    IEC 60730-2-14:2008
    (Consolidated edition of IEC 60730-2-14:1995 with amdt 1 (2001) and 2 (2007))
    Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
    14/04/2008
    N
    Electric actuators for household and similar use
    - - -
    32
    IEC 60730-2-15:2008
    Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls
    30/01/2008 N Automatic electrical water and air flow sensing controls for household and similar use
    IEC 60730-2-18:1997
    30/01/2010 -
     
    EN 60730-2-18:1999
    Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water and air flow sensing controls
    1999
    N
    Automatic electrical water and air flow sensing controls for household and similar use
    EN 60730-1:1995 and its amendments 01/04/2002 -
    33
    EN 60870-2-1:1996
    Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
    1996
    N
    Telecontrol equipment and systems
    Relevant generic standards 01/09/1996 -
     
    IEC 60870-2-1:1995
    Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
    08/12/1995
    N
    Telecontrol equipment and systems
    - - -
    34
    EN 60945: 2002
    Maritime navigation and radio-communication equipment and systems - General requirements - Methods of testing and required test results
    2002
    N
    Maritime navigation and radio-communication equipment and systems
    EN 60945:1997 01/10/2005 -
    IEC 60945:2002
    Maritime navigation and radio-communication equipment and systems - General requirements - Methods of testing and required test results
    2002
    N
    Maritime navigation and radio-communication equipment and systems
    - - -
    34
    EN 60947-1:2004
    Low-voltage switch gear and control gear - Part 1: General rules
    2004
    N
    Low voltage switch gear and control gear
    EN 60947-1:1999
    01/04/2007
    EXPIRED 01/07/2010
    EN 60947-1:2007 Low-voltage switch gear and control gear - Part 1: General rules
    2007 N Low voltage switch gear and control gear
    EN 60947-1:2004
    01/07/2010 Due to expire 01/01/2014
    EN 60947-1:2007/A1:2011 Low-voltage switch gear and control gear - Part 1: General rules
    N Low voltage switch gear and control gear
    EN 60947-1:2007 01/01/2014
     
    IEC 60947-1:2007
    Low-voltage switch gear and control gear - Part 1: General rules
    06/06/2007
    N
    Low voltage switch gear and control gear
    IEC 60947-1:2004
    01/07/2010
    -
    35
    EN 60947-2:2003
    Low-voltage switchgear and control gear - Part 2: Circuit-breakers
    2003
    N
    Circuit breakers
    EN 60947-2:1996
    and its amendments
    - EXPIRED 01/07/2009
    EN 60947-2:2006 Low-voltage switchgear and control gear - Part 2: Circuit-breakers
    2006 N Circuit breakers
    EN 60947-2:2003
    01/07/2009 EXPIRED 01/07/2012
    EN 60947-2:2006/A1:2009 Low-voltage switchgear and control gear - Part 2: Circuit-breakers
    Circuit breakers
    EN 60947-2:2006 01/07/2012
     
    IEC 60947-2:2006
    Low-voltage switch gear and control gear - Part 2: Circuit-breakers
    22/05/2006
    N
    Circuit breakers
    IEC 60947-2:2003
    22/05/2008
    -
    36
    EN 60947-3:1999 
    + A1:2001
    Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    1999
    N
    Switches, disconnectors, switch-disconnectors and fuse-combination units
    - - EXPIRED 01/05/2012
    EN 60947-3:2009
    Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    N Switches, disconnectors, switch-disconnectors and fuse-combination units
    EN 60947-3:1999 
    + A1:2001
    01/05/2012 Due to expire 21/03/2015
    EN 60947-3:2009/A1:2012
    Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    N Switches, disconnectors, switch-disconnectors and fuse-combination units
    EN 60947-3:2009
    21/03/2015
     
    IEC 60947-3:1999 with amdts 1 (2001) and 2 (2005)
    Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    1999
    N
    Switches, disconnectors, switch-disconnectors and fuse-combination units
    - - EXPIRED 28/08/2010
    IEC 60947-3:2008
    Low-voltage switch gear and control gear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    28/08/2008 N Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 60947-3:1999 with amdts 1 (2001) and 2 (2005)
    28/08/2010 -
    37
    EN 60947-4-1:2001
    + A1:2002

    Low-voltage switch gear and control gear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    2001
    N
    Contactors and motor-starters - Electro-mechanical contactors and motor-starters
    EN 60947-4-1:1992 and its amendments 01/09/2003 EXPIRED 01/07/2008
    EN 60947-4-1:2001
    /A2:2005
    Low-voltage switch gear and control gear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    N Contactors and motor-starters - Electro-mechanical contactors and motor-starters
    EN 60947-4-1:2001
    + A1:2002

    01/07/2008 Due to expire 01/04/2013
    EN 60947-4-1:2010
    Low-voltage switch gear and control gear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    N Contactors and motor-starters - Electro-mechanical contactors and motor-starters
    EN 60947-4-1:2001 and its amendments 01/04/2013
     
    IEC 60947-4-1:2002 with amdt 2 (2005)
    (Consolidated edition of IEC 60947-4-1:2000 with amdts 1 (2002)) with amdt 2 (2005)
    Low-voltage switch gear and control gear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
    17/12/2002
    N
    Contactors and motor-starters - Electro-mechanical contactors and motor-starters
    - - -
    38
    EN 60947-4-2:2000
    + A1:2002
    Low-voltage switch gear and control gear - Part 4-2: Contactors and motor- starters - AC semiconductor motor controllers and starters
    2000
    N
    Contactors and motor-starters - AC semiconductor motor controllers and starters
    EN 60947-4-2:1996
    +A2:1998
    01/12/2002 EXPIRED 01/12/2009
    EN 60947-4-2:2000/ A2:2006
    Low-voltage switch gear and control gear - Part 4-2: Contactors and motor- starters - AC semiconductor motor controllers and starters Contactors and motor-starters - AC semiconductor motor controllers and starters
    EN 60947-4-2:2000
    + A1:2002
    01/12/2009
     
    IEC 60947-4-2:2007
    (Consolidated edition of IEC 60947-4-2:1999 with amdts 1 (2001) and 2 (2006))
    Low-voltage switch gear and control gear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
    16/02/2007
    N
    Contactors and motor-starters - AC semiconductor motor controllers and starters
    - - -
    39
    EN 60947-4-3:2000
    Low-voltage switch gear and control gear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    2000
    N
    Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    Relevant generic standards 01/12/2002 EXPIRED 01/11/2009
    EN 60947-4-3:2000
    /A1:2006
    Low-voltage switch gear and control gear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    N Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    EN 60947-4-3:2000
    01/11/2009 Due to expire 18/04/2014
    EN 60947-4-:2000
    /A2:2011
    Low-voltage switch gear and control gear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    N Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    EN 60947-4-3:2000
    /A1:2006
    18/04/2014
     
    IEC 60947-4-3:2007
    (Consolidated edition of IEC 60947-4-3:1999 with amdt 1 (2006))
    Low-voltage switch gear and control gear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    30/01/2007
    N
    Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
    - - -
    40
    EN 60947-5-1:2004
    + AC:2004
    + AC:2005
    Low-voltage switch gear and control gear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
    2004
    N
    Control circuit devices and switching elements - Electro-mechanical control circuit devices
    EN 60947-5-1:1997 +A12:1999 01/05/2007 EXPIRED 01/05/2012
    EN 60947-5-1:2004/A1:2009
    Low-voltage switch gear and control gear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
    N Control circuit devices and switching elements - Electro-mechanical control circuit devices
    EN 60947-5-1:2004
    01/05/2012
     
    IEC 60947-5-1:2003
    Low-voltage switch gear and control gear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
    12/11/2003
    N
    Control circuit devices and switching elements - Electro-mechanical control circuit devices
    - - -
    41
    EN 60947-5-2:1998
    + A2:2004
    Low-voltage switch gear and control gear - Part 5-2: Control circuit devices and switching elements - Proximity switches
    1998
    N
    Control circuit devices and switching elements - Proximity switches
    - - EXPIRED 01/11/2010
    EN 60947-5-2:2007
    Low-voltage switch gear and control gear - Part 5-2: Control circuit devices and switching elements - Proximity switches
    2007 N Control circuit devices and switching elements - Proximity switches
    EN 60947-5-2:1998
    + A2:2004
    01/11/2010 -
     
    IEC 60947-5-2:1997 with amdts 1 (1999) and 2 (2003)
    Low-voltage switch gear and control gear - Part 5-2: Control circuit devices and switching elements - Proximity switches
    1997
    N
    Control circuit devices and switching elements - Proximity switches
    - - EXPIRED 09/10/2009
    IEC 60947-5-2:2007
    Low-voltage switch gear and control gear - Part 5-2: Control circuit devices and switching elements - Proximity switches
    09/10/2007 N Control circuit devices and switching elements - Proximity switches
    IEC 60947-5-2:1997 with amdts 1 (1999) and 2 (2003)
    09/10/2009 -
    42
    EN 60947-5-3:1999
    Low-voltage switch gear and control gear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
    1999
    N
    Proximity devices with defined behaviour under fault conditions
    Relevant generic standards 01/05/2002 EXPIRED 01/03/2008
    EN 60947-5-3:1999 
    /A1:2005
    Low-voltage switch gear and control gear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
    N Proximity devices with defined behaviour under fault conditions
    EN 60947-5-3:1999
    01/03/2008
     
    IEC 60947-5-3:2005
    (Consolidated edition of IEC 60947-5-3:1999 with amdt 1 (2005))
    Low-voltage switch gear and control gear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
    16/04/2005
    N
    Proximity devices with defined behaviour under fault conditions
    - - -
    43
    EN 60947-5-6:2000
    Low-voltage switch gear and control gear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
    2000
    N
    DC interface for proximity sensors and switching amplifiers (NAMUR)
    EN 50227:1997 01/01/2003 -
     
    IEC 60947-5-6:1999
    Low-voltage switch gear and control gear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
    17/12/1999
    N
    DC interface for proximity sensors and switching amplifiers (NAMUR)
    - - -
    44
    EN 60947-6-1:2005
    Low-voltage switch gear and control gear - Part 6-1: Multiple function equipment - Transfer switching equipment
    2005
    N
    Multiple function equipment - Transfer switching equipment
    EN 60947-6-1: 1991
    +A2:1997
    01/10/2008
    -
     
    IEC 60947-6-1:2005
    Low-voltage switch gear and control gear - Part 6-1: Multiple function equipment - Transfer switching equipment
    31/08/2005
    N
    Multiple function equipment - Transfer switching equipment
    IEC 60947-6-1:1989
    31/08/2007
    -
    45
    EN 60947-6-2:2003

    Low-voltage switch gear and control gear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    2003
    N
    Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    EN 60947-6-2:1993
    + A1:1997
    01/09/2005 EXPIRED 01/03/2010
    EN 60947-6-2:2003
    /A1:2007
    Low-voltage switch gear and control gear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    N Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    EN 60947-6-2:2003

    01/03/2010
     
    IEC 60947-6-2:2007
    (Consolidated edition of IEC 60947-6-2:2002 with amdt 1 (2007))
    Low-voltage switch gear and control gear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    30/03/2007
    N
    Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
    - - -
    46
    EN 61008-1:2004
    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    2004
    N
    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
    EN 61008-1:1994
    +A2:1995
    +A14:1998
    01/04/2009
    EXPIRED 01/12/2011
    EN 61008-1:2004/A12:2009
    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    N Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
    EN 61008-1:2004
    01/12/2011
     
    IEC 61008-1:2006
    (Consolidated edition of IEC 61008-1:1996 with amdts 1 (2002) and 2 (2006))
    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
    23/06/2006
    N
    Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
    - - -
    47
    EN 62053-21:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
    2003
    N
    Static meters for active energy (classes 1 and 2)
    EN 60136:1996
    +A1:2000
    01/03/2006 -
     
    IEC 62053-21:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
    2003
    N
    Static meters for active energy (classes 1 and 2)
    - - -
    48
    EN 62054-11:2004
    Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
    2004
    N
    Electronic ripple control receivers
    EN 61037:1992
    +A1:1996
    +A2:1998
    01/07/2007 -
     
    IEC 62054-11:2004
    Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
    2004
    N
    Electronic ripple control receivers
    - - -
    49
    EN 62054-21:2004
    Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
    2004
    N
    Time switches
    EN 61038:1992
    +A1:1996
    +A2:1998
    01/07/2007 -
     
    IEC 62054-21:2004
    Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
    2004
    N
    Time switches
    - - -
    50
    EN 62053-23:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
    2003
    N
    Static meters for reactive energy (classes 2 and 3)
    EN 61268:1996 01/03/2006 -
     
    IEC 62053-23:2003
    Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
    2003
    N
    Static meters for reactive energy (classes 2 and 3)
    - - -
    51
    EN 61326:1997 
    + A1:1998
    + A2:2001
    + A3:2003
    Electrical equipment for measurement, control and laboratory use - EMC requirements
    1997
    N
    Electrical equipment for measurement, control and laboratory use
    - - EXPIRED 01/02/2009
    EN 61326-1:2006
    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
    2006 N Electrical equipment for measurement, control and laboratory use
    EN 61326:1997 
    + A1:1998
    + A2:2001
    + A3:2003
    01/02/2009
     
    IEC 61326-1:2005
    Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
    15/12/2005
    N
    Electrical equipment for measurement, control and laboratory use
    IEC 61326:2002
    15/12/2007
    -
    52
    EN 61543:1995
    + A11:2003
    + A12:2005
    + COR:1997
    + COR:2004
    Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    1995
    N
    Residual current-operated protective devices (RCDs) for household and similar use
    Relevant generic standards - EXPIRED 01/12/2008
    EN 61543:1995/
    A2:2006
    Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    N Residual current-operated protective devices (RCDs) for household and similar use
    EN 61543:1995
    + A11:2003
    + A12:2005
    + COR:1997
    + COR:2004
    01/12/2008
     
    IEC 61543:1995 with amdts 1 (2004) and 2 (2005)
    Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
    1995
    N
    Residual current-operated protective devices (RCDs for household and similar use
    - - -
    53
    EN 61800-3:2004
    Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    2004
    N
    Adjustable speed electrical power drive systems
    EN 61800-3:1996
    +A11:2000
    01/10/2007
    Due to expire 19/12/2014
    EN 61800-3:2004/A1:2012
    Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods N Adjustable speed electrical power drive systems
    EN 61800-3:2004
    19/12/2014
     
    IEC 61800-3:2004
    Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
    12/08/2004
    N
    Adjustable speed electrical power drive systems
    - - -
    54
    EN 61812-1:1996

    Specified time relays for industrial use - Part 1: Requirements and tests
    1996
    N
    Specified time relays for industrial use
    - EXPIRED 01/01/2002
    EN 61812-1:1996

    /A11:1999
    Specified time relays for industrial use - Part 1: Requirements and tests
    N Specified time relays for industrial use
    EN 61812-1:1996
    +AC:1999
    01/01/2002 Due to expire 29/06/2014
    EN 61812-1:2011
    Specified time relays for industrial use - Part 1: Requirements and tests
    N Specified time relays for industrial use
    EN 61812-1:1996 and its amendment

    29/06/2014
     
    IEC 61812-1:1996
    Specified time relays for industrial use - Part 1: Requirements and tests
    1996
    N
    Specified time relays for industrial use
    - - -
    55
    EN 300 386 v1.3.3
    Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
    2005
    N
    Telecommun-ication network equipment
    EN 300 386-2 V1.1.3
    31/08/2007 EXPIRED 31/07/2011
    EN 300 386 v1.4.1
    Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
    2008 N Telecommun-ication network equipment
    EN 300 386 V1.3.3
    31/07/2011 Due to expire 31/01/2014
    EN 300 386 v1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
    2011 N Telecommun-ication network equipment
    EN 300 386 v1.4.1 31/01/2014 Due to expire 30/11/2015
    EN 300 386 v1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
    N Telecommun-ication network equipment
    EN 300 386 v1.5.1 30/11/2015
    56 ISO 13766:2006
    Earthmovnery –Electromagnetic compatibility
    2006 N Earthmoving machinery - - -
    57 ISO 14982:1998
    Agricultural and forestry machinery –Electromagnetic compatibility – Test methods and acceptance criteria
    1998 N Agricultural and forestry machinery
    - - -


    Example:
    A new laptop computer is imported into Australia on 20/08/2007. The supplier can use a test report to either AS/NZS CISPR 22:2004 or AS/NZS CISPR 22:2006 to show compliance. The supplier then imports a different new laptop computer on 3/06/2008. The supplier can now only use a test report to AS/NZS CISPR 22:2006. A test report to the earlier version is no longer acceptable.
    Why?
    From the table (extract below) we can see that AS/NZS CISPR 22:2006 was published on 2/06/2006 (column 5) and replaces AS/NZS CISPR 22:2004 (column 8). Until 2/06/2008 which is the expiry date of the replaced standard (column 9), a supplier may use either AS/NZS CISPR 22:2004 or AS/NZS CISPR 22:2006 to show compliance.
    From 2/06/2008 (column 9), only AS/NZS CISPR 22:2006 can be used.
    Note that the remarks in column 10 state that testing above 1 GHz is required in Australia from 1 October 2011.


    12345678910[/td]
    Serial
    Applicable Standard
    Full Title of Standard
    Source of Std
    Publi-cation Date
    Vari-ation Y/N
    Brief description of equipment to which standard should apply
    Standard being replaced
    Expiry Date of replaced standard
    Remarks
    8
    AS/NZS CISPR 22:2006
    Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
    AS/NZS
    02/06/2006
    N
    Information technology equipment, modems, fax machines, BPL modems
    AS/NZS CISPR 22:2004
    02/06/2008
    Testing radiated emissions above 1 GHz is required from 1 October 2011.

    本文由fasten在供参考的旧版安规网发表,建议进入新版交流!
    非商业性技术论坛!严禁任何形式广告!宽容+理解,共建和谐家园!
    搜索是最好的工具,请学会搜索!请注意提问的技巧,说清楚问题!
    备份站 | 留言 | FAQ | QQ群 | 认证工具 | 付款方式 | 广告服务 | 整站教程 | 国标下载 | 安规博客
    skype: fasten163 - MSN: fasten163@163.com - Mail:fasten163@sina.com
    顶端 Posted: 2013-05-12 08:45 | 8 楼    新版 | 安规网
    安规网 » 澳洲产品认证


    安规网免责声明
    安规网已运行
    安规网所有的原创文章,版权归安规网和作者共同拥有,未经许可,任何网站不得非法盗链、转载及抄袭!
    网友文章或评论仅代表作者个人观点并由其承担相应法律责任,不代表本站观点!如果侵犯了您的权益,请提供相关证明,我们将尽快删除!
    安规网为非经营性技术论坛,所有资源均为网友自主提供,仅供个人学习与研究,版权归原作者,切勿用于商业用途,否则一切后果与安规网无关!

    关于我们 | 认证工具 | 免责声明 | 法律条款
    Total 0.810643(s) query 6, Time now is:08-16 04:23, Gzip enabled
    Powered by Angui.org Support by PHPWind

    安规网版权所有 Copyright Reserved
    粤ICP备07035324号