这里为安规网旧版程序,不再提供发帖,请转到安规网新版程序:安规论坛bbs.angui.org讨论
安规网 » 澳洲产品认证 » 关于C-TICK问题
本页主题: 关于C-TICK问题 打印 | 加为IE收藏 | 收藏主题 | 上一主题 | 下一主题

kinglxj
资助会员
头衔:大侠问苍天 大侠问苍天

级别: 退休版主
精华: 2
发帖: 3698
安规威望: 422 点
安规金币: 11243 个
安规宣传: 0 次
在线时间:2290(小时)
注册时间:2007-06-11
最后登录:2013-11-18

关于C-TICK问题


第一次接触C-TICK,有些问题需要请教专家!

本产品为带电池柜的电源,现在需要满足C-TICK要求,有以下问题需要请教:

1、请问C-TICK Label要出现在哪里?铭牌/电池柜铭牌/外包装/安全手册/操作手册?

2、澳洲分公司已经有N**号码,以前所有A品牌公司产品可以全部用这个N919号码,但是现在A公司和B公司合并为一个公司,采用B公司的LOGO,是否还是可以使用这个C-TICK N919号码?

3、产品生产在中国,申请C-TICK需要提供什么资料?C-TICK报告/电路图,还需要什么其他资料么?是否还需要什么申明?

现在我还需要做什么工作呢


等待中。。。。
谢谢!

本文由kinglxj在供参考的旧版安规网发表,建议进入新版交流!

灯头量规

常相守是个考验!
顶端 Posted: 2010-12-30 14:49 | [楼 主]    新版 | 旧版安规网
cjh80156179




级别: 安规学徒
精华: 0
发帖: 457
安规威望: 20 点
安规金币: 106 个
安规宣传: 0 次
在线时间:224(小时)
注册时间:2008-02-27
最后登录:2011-12-30

1、C-TICK标志在铭牌中  /电池柜铭牌/外包装/安全手册/操作手册也可出现。
2、 可以用N919号码。
3、资料:说明书、原理图、合格样品。

本文由cjh80156179在供参考的旧版安规网发表,建议进入新版交流!
本帖最近评分记录:
  • 安规金币:+10(kinglxj) 积极讨论
  • CJH
    顶端 Posted: 2010-12-30 16:55 | 1 楼    新版 | 安规网
    kinglxj
    资助会员
    头衔:大侠问苍天 大侠问苍天

    级别: 退休版主
    精华: 2
    发帖: 3698
    安规威望: 422 点
    安规金币: 11243 个
    安规宣传: 0 次
    在线时间:2290(小时)
    注册时间:2007-06-11
    最后登录:2013-11-18

    Quote:
    引用第1楼cjh80156179于2010-12-30 16:55发表的  :
    1、C-TICK标志在铭牌中  /电池柜铭牌/外包装/安全手册/操作手册也可出现。
    2、 可以用N919号码。
    3、资料:说明书、原理图、合格样品。


    谢谢cjh80156179。追问几个问题。

    1、C-TICK标志在铭牌中  /电池柜铭牌/外包装/安全手册/操作手册也可出现。
    ----意思是必须出现在铭牌中,其他如电池柜铭牌/外包装/安全手册/操作手册可以有也可以没有对不?

    2、 可以用N919号码。
    ----OK

    3、资料:说明书、原理图、合格样品。
    ----还需要提供样品?只需要你所说的那几项资料么?其他都不需要。

    本文由kinglxj在供参考的旧版安规网发表,建议进入新版交流!
    常相守是个考验!
    顶端 Posted: 2010-12-30 17:16 | 2 楼    新版 | 安规网
    kamleung


    级别: 安规学徒
    精华: 0
    发帖: 186
    安规威望: 15 点
    安规金币: 23 个
    安规宣传: 0 次
    在线时间:281(小时)
    注册时间:2009-12-31
    最后登录:2011-08-04

    图片:


    To comply with the Australia EMC regulatory, the suppliers must satisfy four basic requirements:
          1) Ensure that the product complies with the appropriate mandated EMC standard.
          2) Make and hold a DoC (Declaration of Conformity).
          3) Prepare and keep compliance records.
          4) Label the product with the C-Tick mark

    Once these basic requirements have been satisfied, a product can be offered for sale without the involvement of ACA or RSM. The Australia government also prints a booklet to explain his EMC requirements. For your convenience, the PDF booklet is uploaded to this forum for your reference.

    About Declaration of Conformity (DoC) it is a statement signed by the supplier certifying that the product has been tested and found to comply with any required standards. The Australia government department has put a DoC template on his official webpage and you may download the tempate at the government link below:
         HTTP://www.acma.gov.au/webwr/_assets/main/lib310117/c02-suppliers_declaration_of_conformity.doc

    In view of your questions, some information can be shared as below:
    1) Please read my PNG file for the official requirements, such as color, location, scale and etc. The C-Tick artwork can be downloaded at the government link (http://www.acma.gov.au/webwr/telcomm/stds/compliance_marks/c-tick.zip)

    2) If the business registration of Company A is still valid after merging with Company B, then you may use the N-number of Company A. Otherwise, you should use Company B's registration number.

    3) In fact, C-Tick Mark needs not to apply through the Australia Authority. Hence, you just test the product with your own laboratory and then build your own compliance folder. Although suppliers are not required to submit the product or proof of compliance to the regulatory bodies at this stage, they must retain a compliance folder containing the DoC and all required compliance records.

    Required compliance records include test reports indicating compliance margins, a description of the product and all documentation that clearly identifies it (e.g., photographs, block diagrams, drawings, and circuit diagrams), and paperwork showing the product's brand name, model number, etc.

    Compliance records, which must be in English, can be kept electronically. Records must be kept for five years after the product ceases to be supplied in Australia or New Zealand. Hard copies of compliance documentation must be made available to ACA or RSM for audit or investigation within 10 business days of a written request from the regulatory body.

    A supplier must complete and retain a DoC every time a new product or model of a product is to be marketed. If a product has had changes that are either cosmetic or that do not alter its RF emission characteristics, then compliance is presumed under the DoC maintained for the earlier model. In situations where variants exist, the supplier must add a signed statement to the original compliance records outlining the changes made and the reasons for using a single DoC for marketing.


    [ 此贴被kamleung在2011-01-03 17:07重新编辑 ]

    本文由kamleung在供参考的旧版安规网发表,建议进入新版交流!
    附件: emcbook (C-Tick Mark).pdf (953 K) 下载次数:21

    本帖最近评分记录:
  • 安规威望:+1(kinglxj) 积极讨论
  • 顶端 Posted: 2011-01-03 16:35 | 3 楼    新版 | 安规网
    吕布




    级别: 安规元老
    精华: 0
    发帖: 636
    安规威望: 49 点
    安规金币: 1 个
    安规宣传: 1 次
    在线时间:761(小时)
    注册时间:2008-03-19
    最后登录:2015-03-09

    马克,有时间好好学习下

    本文由吕布在供参考的旧版安规网发表,建议进入新版交流!
    顶端 Posted: 2011-10-25 14:00 | 4 楼    新版 | 安规网
    安规网 » 澳洲产品认证


    安规网免责声明
    安规网已运行
    安规网所有的原创文章,版权归安规网和作者共同拥有,未经许可,任何网站不得非法盗链、转载及抄袭!
    网友文章或评论仅代表作者个人观点并由其承担相应法律责任,不代表本站观点!如果侵犯了您的权益,请提供相关证明,我们将尽快删除!
    安规网为非经营性技术论坛,所有资源均为网友自主提供,仅供个人学习与研究,版权归原作者,切勿用于商业用途,否则一切后果与安规网无关!

    关于我们 | 认证工具 | 免责声明 | 法律条款
    Total 0.143170(s) query 6, Time now is:09-27 03:21, Gzip enabled
    Powered by Angui.org Support by PHPWind

    安规网版权所有 Copyright Reserved
    粤ICP备07035324号