田'l;'l;'l女女女

平步青云玩具

Clause    Test Description
7.14    Marking and instructions – Marking durability test
8    Protection Against Access to Live Parts
10    Power input and current
11    Heating Test
13    Leakage current and electric strength at operating temperature
15.1    Moisture resistance – Protection degree against water test
15.2    Moisture resistance – Spillage test
15.3    Moisture resistance – Humidity test
16    Leakage current and electric strength
17    Overload protection of transformers and associated circuits
19.2    Abnormal operation – Restricted heat dissipation test (0,85 times power input)
19.3    Abnormal operation – Restricted heat dissipation test (1,24 times power input)
19.4    Abnormal operation – Temperature control short-circuited test
19.5    Abnormal operation – Test for class 0I and class I appliances with tubular sheathed or embedded heating elements
19.6    Abnormal operation – PTC heating elements over voltage test
19.7    Abnormal operation – Locking moving parts of motor test

19.8    Abnormal operation – One phase disconnection test of 3 -phase appliance
19.9    Abnormal operation – Motor overload test
19.10    Abnormal operation – Series motor overspeed test
19.11.1 & 19.11.2    Abnormal operation – Fault condition of electronic circuit test
19.11.3    Abnormal operation – Protective electronic circuit test
19.11.4    Abnormal operation – EMP test
19.12    Abnormal operation – Current fuse reliability test(refer also to clause 19.11.2,19.11.3)
19.13    Abnormal operation – Acceptance conditions after all abnormal operation tests
20.1    Stability and mechanical hazards – Stability test
20.2    Stability and mechanical hazards – Mechanical hazards test
21.1    Mechanical strength – Impact test
21.2    Mechanical strength - Solid insulation strength
22.5    Construction – Plug discharge test
22.11    Construction – Non-detachable parts push and pull test
22.12    Construction – Handles, knobs, grips and levels pull test
22.16    Construction – Cord reel abrasion test
23.3    Internal wiring – Flexing test
23.5    Internal wiring – Insulation test
24.5    Components – Motor Capacitor resonance voltage measurement
25.14    Supply connection and external flexible cords – Flexing test
25.15    Supply connection and external flexible cords –Pull and torque test
26.3    Terminals for external conductors – Torque test
27.5    Provision for earthing – Earthing continuity test
28.1    Screws and connections – Screws torque test
29    Clearances, creepages distances and solid insulation
30.1    Resistance to heat and fire – Ball pressure test
30.2    Resistance to heat and fire – Glow wire test
30.2.4    Resistance to heat and fire –Needle flame test
Annex D    Thermal motor protectors
Annex H    Switches

就这样一章章的讲吧。

哪位高手开始行动啊

請樓主或是版主從第一章節開始，我們後面跟上。

或是建議版主每一章節開一新貼，規定下開始結束時間，搞能有獎活動什麼的，這樣大家積極性比較高些，我相信隻要是加入了安規網的達人朋友，個個在工作中都多少和安規有點聯系的了，應該會大力支持這樣的活動的，新手可以有一個學習的機會，高手也會樂意把經驗拿出來分享的了。

请看这里：
http://www.angui.org/read.php?tid-72700-fpage-4.html
http://www.angui.org/read.php?tid-72843-fpage-3.html

加强绝缘好像不能简单的和双重绝缘画等号的

具体点说，防水剃须刀带不防水的充电器，充电器输入是220V～,输出是DC 5V，那么剃须刀铭牌可以标识防水标识吗？请高人指点。因为认证时和检测机构的理解有异议，挺郁闷的，参考标准EN 60335-2-8  clause 6.2至7.12。不胜感激。

Appliances intended to be connected to the supply mains by means of a plug shall be
constructed so that in normal use there is no risk of electric shock from charged capacitors
#having a rated capacitance exceeding 0,1 μF$ when the pins of the plug are touched.这是一段重要的内容，内藏玄机

Quote:

引用第10楼zys770于2010-08-10 17:26发表的  :
第三章定义的词，加了些图片，大家觉得是不是这样？

引用的是十三章 表四  额定电压150-250v
基本绝缘耐压1000V/分钟
附加绝缘耐压1750/分钟V
.......

以上的1000\V每分钟 怎么理解？ 因我是刚参加工作，刚接触安规，恳请指教！

那是指在温升测试完成后打的耐压，也就是正常工作下进行的耐压，1250V/Min指的不工作状态。

请教：IEC 60335-1 第四版与第五版有哪些差异？

Quote:

引用第34楼hanpinyu于2010-08-31 20:56发表的  :
加强绝缘好像不能简单的和双重绝缘画等号的

双重绝缘效能等同于加强绝缘,不同的是加强绝缘指的是厚度大于或者等于2mm的实体绝缘.

Quote:

引用第17楼zys770于2010-08-13 09:00发表的  :
3.3.5的功能性绝缘是什么意思，

电源开关的两个极之间属于功能性绝缘吗?

我觉得不算，曾经看过，电源L,N之间，器件的绝缘表面这些才算功能绝缘