安规网 » 综合认证 » UL508 的spacing问题
本页主题: UL508 的spacing问题 打印 | 加为IE收藏 | 收藏主题 | 上一主题 | 下一主题

水晶葡萄


级别: 安规学徒
精华: 0
发帖: 211
安规威望: 19 点
安规金币: 216 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:237(小时)
注册时间:2009-03-11
最后登录:2011-11-07

UL508 的spacing问题

UL508的36、39和180条款都是说的spacing (clearance, creepage)的问题,不知道这些条款以及这些表格具体怎么区分呢?分别用于什么情况呢?

本文由水晶葡萄在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2010-02-21 15:20 | [楼 主]    新版 | 旧版安规网
henrybtl




级别: 安规新人
精华: 0
发帖: 17
安规威望: 23 点
安规金币: 141 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:31(小时)
注册时间:2007-12-20
最后登录:2011-10-31

学习中, 哪位高手指点一下啊

本文由henrybtl在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2010-03-10 11:15 | 1 楼    新版 | 安规网
水晶葡萄


级别: 安规学徒
精华: 0
发帖: 211
安规威望: 19 点
安规金币: 216 个
安规宣传: 0 次
安规测试报告: 0 份
在线时间:237(小时)
注册时间:2009-03-11
最后登录:2011-11-07

Tables 36.3 and 36.4 are used for pollution degree 2 applications.  The report for xxx didn't indicate that it is rated for pollution degree 2.  Otherwise, Table 36.1 will be used.  Table 180.1 only applies to PCB's and it may be used as an alternate to the before mentioned three tables.  The spacings requirements are, in general, lower than the other tables.  Table 180.1 is for the PCB only and the other tables are for all other locations.

以上是UL的解释。希望对大家有所帮助。

本文由水晶葡萄在供参考的旧版安规网发表,建议进入新版交流!
顶端 Posted: 2011-08-26 17:01 | 2 楼    新版 | 安规网
安规网 » 综合认证


安规网免责声明
安规网已运行
安规网所有的原创文章,版权归安规网和作者共同拥有,未经许可,任何网站不得非法盗链、转载及抄袭!
网友文章或评论仅代表作者个人观点并由其承担相应法律责任,不代表本站观点!如果侵犯了您的权益,请提供相关证明,我们将尽快删除!
安规网为非经营性技术论坛,所有资源均为网友自主提供,仅供个人学习与研究,版权归原作者,切勿用于商业用途,否则一切后果与安规网无关!

关于我们 | 认证工具 | 免责声明 | 法律条款 | 广告服务
Total 0.069880(s) query 10, Time now is:05-10 04:51, Gzip enabled
Powered by Angui.org Support by PHPWind

安规网版权所有 安规网 安规网论坛 安规认证论坛 Copyright Reserved
粤ICP备07035324号