Quote:

引用第15楼pwong03492于2007-09-01 09:24发表的  :


1. 好象没听说过 UL 764 这份标准, 是怎么回事?
2. 我翻遍了我们工厂所有 UL file 的 appendices, 没有发现相关的描述, 哪位好心人可以上传一份参考?

很少人使用UL764标准，就连UL检验员都只需要带上UL764的FUII即可，这种产品比较简单，但这个FUII估计你在网上搜索不到，可以问UL检验员要一份来复印（如果他随身带有的话）。

Please refer to FUII 764 Wiring Harness (ZPFW2): you can find it on your FOLLOW-UP SERVICE PROCEDURE

L12    Harnesses which do not employ a Power-Supply Cord or harnesses which employ a Listed (labeled) Power-Supply Cord will require a Form N or Form 1-N harness label.  Harnesses which employ a Power-Supply Cord which is not Listed, shall comply with the requirements for a Listed Power-Supply Cord for the power-supply cord portion, and will require a Form T or 1-T harness label

    A wiring harness consisting of four parts or less, having as one of the parts a power-supply cord which has not been previously Labeled (Form 1-T).

    A wiring harness consisting of more than four parts, having as one of the parts a power-supply cord which has not been previously Labeled (Form T).

Quote:

引用第18楼hotkey于2007-09-01 17:09发表的  :
Please refer to FUII 764 Wiring Harness (ZPFW2): you can find it on your FOLLOW-UP SERVICE PROCEDURE

L12    Harnesses which do not employ a Power-Supply Cord or harnesses which employ a Listed (labeled) Power-Supply Cord will require a Form N or Form 1-N harness label.  Harnesses which employ a Power-Supply Cord which is not Listed, shall comply with the requirements for a Listed Power-Supply Cord for the power-supply cord portion, and will require a Form T or 1-T harness label

    A wiring harness consisting of four parts or less, having as one of the parts a power-supply cord which has not been previously Labeled (Form 1-T).
.......

你的到来对求助者来说简直是雪中送炭了，这个帖子管理员稍候应该会加点金币才对。

Quote:

引用第13楼happyshidi于2007-08-31 11:34发表的  :
少贴的话不止是开VN 了,还要报废掉没有贴标签的线材 !而且2007年7月1日开始VN要罚钱了,500美金!

啊,要罰錢嗎?哪裡有這個規定呢?
UL應該去查電線廠家,而不是總盯著買線的客戶.
或者改用其它方式.因為使用標籤很浪費紙張.

现在UL规定，在线材上也要贴标签，注明这条线所能承受的最大电压和电流。

请教： 网线是否属于wiring harness ,是否需加贴橘色标签？

最简单的区就是插头+线材+尾插(端子独立的不算，带胶壳的才一部份)，如果一条线从中间开分接两条那就照数。

請教!!
插头+线材+ WIRE HARNESS 端子, 中間帶有 SR.
現 UL說不能貼 POWER CORD & WIREHARNESS 標籤, 而且要開VN.
請問有沒有救啊? 

没贴UL标签的话被UL公司查到很惨的
我们公司都是这样的
上次查到赔了不少钱

誰有UL的文件說端子線要有Wire harness label 和process wire label? 可否提供一個? 我們是做變壓器的, 現在供應商要我們拿文件給他們才肯給我們提供wire harness label. 真暈!

我们厂也是，现在加工好的单支线来货卡通箱上无ul lable是否违反ul的规定呢？请哪位大侠帮忙找找资料？谢谢

线束需要加贴什么标签？
橙色标签吗？那种标签多少钱一张？50PCS

UL标签是不是还有个MQ的单位？MQ是什么意思呢？

刚看到有个关于TRACBILITY的帖子,里面的内容就有关于764标签的....
764现在是强制的,没有的话会直接出VN.同时做好的成品需要全部返工(拆掉没有标签的线,换有标签的)

Quote:

引用第19楼sunjiping73于2007-09-06 13:43发表的  :


啊,要罰錢嗎?哪裡有這個規定呢?
UL應該去查電線廠家,而不是總盯著買線的客戶.
或者改用其它方式.因為使用標籤很浪費紙張.

UL好似在线厂内一般查不到问题的，因此也就只有紧盯买线的客户了，呵呵.....