a.产品名称及图片:
s4`,Z*H 安规网www.angui.org发表,外站出现为抄袭 冲击钻
37b6w6{D 安规网www.angui.org发表,外站出现为抄袭 drill.jpg |OiM(E( 安规网www.angui.org发表,外站出现为抄袭 b.产品参数:
5)C`W]JE 安规网www.angui.org发表,外站出现为抄袭 230V~; 50Hz; 500W; 1900/2800RPM; 13mm, Class II
BG8`B'i 安规网www.angui.org发表,外站出现为抄袭 c.具体不合格项目:
4Mr
Uo9L$s 安规网www.angui.org发表,外站出现为抄袭 -基本绝缘内线可以接触到运动部件,带电部件与可接触金属部件可以发生闪络,不满足机械指令和EN60745
0at['zw 安规网www.angui.org发表,外站出现为抄袭 d.测试所依据的标准/法规及条款:机械指令与EN60745
wx8Qz,Z 安规网www.angui.org发表,外站出现为抄袭 e.测试机构:RAPEX
Z+Cjg#+ 安规网www.angui.org发表,外站出现为抄袭 f.源自RAPEX:
http://ec.europa.eu/consumers/dyna/rapex/create_rapex.cfm?rx_id=211 ~e_ 安规网www.angui.org发表,外站出现为抄袭 W3gHzT?{ 安规网www.angui.org发表,外站出现为抄袭 剖析:
H=*lj.x 安规网www.angui.org发表,外站出现为抄袭 1.不满足机械指令如下条款ANNEX I 1.3.7要求,机械附录I中1.3.7提到含运动部件的设备应设计成防止任何因接触运动部件导致的危险.内线接触运动部件必然破坏基本绝缘,操作者使用电钻将直接导致触电,机械指令原文如下:
qVssw* GDB 安规网www.angui.org发表,外站出现为抄袭 1.3.7. Prevention of risks related to moving parts
c'DNO~H 安规网www.angui.org发表,外站出现为抄袭 The moving parts of machinery must be designed, built and laid out to avoid hazards or, where hazards persist, fixed with guards or protective devices in such a way as to prevent all risk of contact which could lead to accidents.All necessary steps must be taken to prevent accidental blockage of moving parts involved in the work. In cases where, despite the precautions taken, a blockage is likely to occur, specific protection devices or tools, the instruction handbook and possibly a sign on the machinery should be provided by the manufacturer to enable the equipment to be safely unblocked.
'{w[).c. 安规网www.angui.org发表,外站出现为抄袭 9]vy#a# 安规网www.angui.org发表,外站出现为抄袭 该条文其实在EN60745-1的第22节有类似要求,详见原文:
w<u@L 安规网www.angui.org发表,外站出现为抄袭 22 Internal wiring
LP'~7FG 安规网www.angui.org发表,外站出现为抄袭 22.1 Wireways shall be smooth and free from sharp edges.
RiZ)#0 安规网www.angui.org发表,外站出现为抄袭 Wires shall be protected so that they do not come into contact with burrs, cooling fins, etc.,
Q`!^EyRA:^ 安规网www.angui.org发表,外站出现为抄袭 which may cause damage to the insulation of conductors.
m
wutv8? 安规网www.angui.org发表,外站出现为抄袭 Holes in metal through which insulated wires pass shall be provided with bushings or, unless
I7HGV( 安规网www.angui.org发表,外站出现为抄袭 required otherwise in part 2, shall have smooth, well-rounded edges. A radius of 1,5 mm is
${e5Ka 安规网www.angui.org发表,外站出现为抄袭 considered to be well rounded.
biG :Xn 安规网www.angui.org发表,外站出现为抄袭 Wiring shall be effectively prevented from coming into contact with moving parts. w7c0j
If{ 安规网www.angui.org发表,外站出现为抄袭 Compliance is checked by inspection.
E9\u^"GVO 安规网www.angui.org发表,外站出现为抄袭 P@5}}vwS 安规网www.angui.org发表,外站出现为抄袭 L[^.pO 安规网www.angui.org发表,外站出现为抄袭 ==========================================================
PqMu2 e 安规网www.angui.org发表,外站出现为抄袭 公告原文:
http://ec.europa.eu/consumers/dyna/rapex/create_rapex.cfm?rx_id=211 R|92T*h 安规网www.angui.org发表,外站出现为抄袭 20 1338/08
pJJOy 安规网www.angui.org发表,外站出现为抄袭 产品:
J1w,;T\55 安规网www.angui.org发表,外站出现为抄袭 Category: Machinery
\]0#jI/: 安规网www.angui.org发表,外站出现为抄袭 Product: Electric impact drill
G-| 安规网www.angui.org发表,外站出现为抄袭 Brand: VD-TECH Profi
2UG>(R: 安规网www.angui.org发表,外站出现为抄袭 Type/number of model: V532, barcode: 8014132030189, batch code: T-2247-1
<v!jS=T 安规网www.angui.org发表,外站出现为抄袭 Description: The outside of the electric drill is red plastic. There is a switch on one side for selecting the material to be drilled. The chuck speed switch has two positions. The direction of rotation can be changed and there is also a locking option for permanent operation. Technical parameters: .
OF0v0Y/a 安规网www.angui.org发表,外站出现为抄袭 Country of origin: Unknown
L d{`k 安规网www.angui.org发表,外站出现为抄袭 缺陷:
+2w<V0V_ 安规网www.angui.org发表,外站出现为抄袭 Electric shock
^Y%<$IFG 安规网www.angui.org发表,外站出现为抄袭 The product poses a risk of electric shock because:
-"EPU]q 安规网www.angui.org发表,外站出现为抄袭 - the basic insulated wires may come into contact with moving, accessible metal parts, and could therefore be damaged,
" {X0& 安规网www.angui.org发表,外站出现为抄袭 - insulation of the wires is not sufficient, thus flashover can occur between the live parts and accessible metal parts.
@&x'.2
[nv 安规网www.angui.org发表,外站出现为抄袭 结论:
`!xI!Y\ 安规网www.angui.org发表,外站出现为抄袭 The product does not comply with the Machinery Directive and the relevant European standard EN 60745.